Features:
- Each unit has 16 timing ranges built-in
- Selecting a range is easy using a rotary switch (no math
is required or DIP switches to set)
- Timing ranges up to 24 hours
- Independently selectable & adjustable ON & OFF
times
- Uses industry-standard 8 or 11 pin octal sockets
- 10A DPDT output contacts
|
 |
| |
|
| Part Number |
Function |
Input Voltage |
Wiring Socket |
 TR-63122 |
REPEAT CYCLE
(OFF Time First
Followed by ON Time and Repeating)
(L) |
120V AC/DC |
 |
| TR-63126 |
12V AC/DC |
| TR-63128 |
24V AC/DC |
| TR-63121 |
240V AC |
| TR-65122 |
REPEAT CYCLE
(ON Time First
Followed by OFF Time and Repeating)
(M) |
120V AC/DC |
| TR-65126 |
12V AC/DC |
| TR-65128 |
24V AC/DC |
| TR-65121 |
240V AC |
| TR-66122 |
DELAYED INTERVAL
(OFF Time
First Followed by ON Time Follwed by OFF State Until Reset)
(N) |
120V AC/DC |
| TR-66126 |
12V AC/DC |
| TR-66128 |
24V AC/DC |
| TR-66121 |
240V AC |
| TR-66522 |
DELAYED INTERVAL
Control
Switch Trigger
(OFF Time First Followed by ON Time Follwed by OFF State
Until Reset)
(P) |
120V AC/DC |
 |
| TR-66526 |
12V AC/DC |
| TR-66528 |
24V AC/DC |
| TR-66521 |
240V AC |
| Timing
Functions |
| Code / Function |
Operation |
Timing Chart |
(L) REPEAT CYCLE
(OFF 1st) |
Upon application of input voltage, the time delay (t1)
begins. At the end of the time delay (t1), the output is energized and remains
in that condition for the time delay (t2). At the end of this time delay, the
output is de-energized and the sequence repeats until input voltage is
removed. |
 |
(M) REPEAT CYCLE
(ON 1st) |
Upon application of input voltage, the output is energized
and the time delay (t1) begins. At the end of the time delay (t1), the output
is de-energized and remains in that condition for the time delay (t2). At the
end of this time delay, the output is energized and the sequence repeats until
input voltage is removed. |
 |
(N) DELAYED INTERVAL
Single Cycle |
Upon application of input voltage, the time delay (t1)
begins. At the end of the time delay (t1), the output is energized and remains
in that condition for the time delay (t2). At the end of this time delay (t2),
the output is de-energized. Input voltage must be removed to reset the time
delay relay. |
 |
| (P) TRIGGERED DELAYED INTERVAL |
Upon application of input voltage, the time delay relay is
ready to accept a trigger. When the trigger is applied, the time delay (t1)
begins. At the end of the time delay (t1), the output is energized and remains
in that condition for the time delay (t2). At the end of the time delay (t2),
the output is de-energized & the relay is ready to accept another trigger.
During both time delay (t1) & time delay (t2), the trigger is ignored. |
 |
| Voltage Tolerance: |
AC Operation: +10/-15% of nominal at 50/60 Hz.
DC
Operation: +10/-15% of nominal. |
| Load (Burden): |
2 VA |
| Setting Accuracy: |
Maximum Setting (Adjustable): +5%, -0%
Minimum Setting
(Adjustable): +0%, -50% |
| Repeat Accuracy: |
> 2 Seconds Delay ±0.1%
0.1 - 2 Seconds Delay
±2% |
| Reset Time: |
On Delay/Interval/Repeat Cycle/Delayed Interval: 0.1
Seconds
Off Delay/Single Shot/Watchdog/Triggered Delayed Interval: 0.04
Seconds |
| Start-up Time: |
(Time from when power is applied until unit is timing)
120 & 240V units 0.05 Seconds
12, 24 & 48V units 0.08 Seconds |
| Maintain Function Time: |
(Time unit continues to operate after power is removed) 0.01
Seconds for all units |
| Temperature: |
12-120V Input Voltage: -28° to 65°C (-18° to
150°F)
240V Input Voltage: -28° to 50°C (-18° to
122°F) |
| Triggering Off Delay, Single Shot or
Watchdog Units: |
Timing sequence must be initiated only after input voltage is
applied to unit. Minimum required trigger switch closure time is 0.1
seconds. |
| Compatibility: |
Using a solid state switch to initiate the time sequence is
acceptable. See www.macromatic.com/leakage for information regarding leakage
current limits and other solid state design considerations. |
| Output Contacts (All TR-6 Series Products
except TR-606 True Off Delay): |
DPDT 10A @ 240V AC/30V DC, 1/2HP @ 120/240V AC (N.O.), 1/3HP
@ 120/240V AC (N.C.) B300 & R300; AC15 & DC13 |
| Output Contacts (TR-606 True Off
Delay): |
DPDT 10A @ 240V AC; 8A @ 28V DC, 1/2 HP @ 240V AC, 1/4HP @
120V AC B300 & R300 |
| Life: |
Mechanical: 10,000,000 operations (2,000,000 operations on
TR-606 Series only)
Full Load: 100,000 operations |
| IMPORTANT FOR TR-606 SERIES ONLY: |
These relays are shipped from the factory in the OFF state. A
shock to the relay during shipping or installation may cause it to change to
the ON state. It is recommended that input voltage be applied to the product
for at least 0.1 second and removed to cycle the unit to the OFF state prior to
use in the application. Please note that it will take as long as the OFF Delay
setting to reset the unit once input voltage has been removed. |
