| Description |
Part Number |
Image |
Drawing |
8 Pin Octal Socket - Surface or DIN Rail-Mounted
10A @ 600V (Plug-in Three Phase Monitor Relays require a 600V-rated socket when used on system voltages greater than 300V)
1 or 2 #12-22 AWG Wire
Recommended Tightening Torque of 6-7 in-lbs. (12 in-lbs maximum)
Pressure Wire Clamp Terminations
|
 70169-D |
 |
 |
11 Pin Octal Socket -Surface or DIN Rail-Mounted 10A @ 300V
1 or 2 #12-22 AWG Wire Recommended Tightening Torque of 6-7 in-lbs. (12 in-lbs maximum)
Pressure Wire Clamp Terminations
|
70170-D |
 |
 |
8 Pin Octal Socket - Back-Mounted
10A @ 300V
Pressure Wire Clamp Terminations
|
SR6P-M08G |
 |
 |
11 Pin Octal Socket - Back-Mounted
10A @ 300V
Pressure Wire Clamp Terminations
|
SR6P-M11G |
 |
 |
12 Pin Socket - Surface-Mounted
10A @ 600V
#12-20 AWG
Wire Pressure Wire Clamp Terminations
|
SD12-PC |
 |
 |
Hold Down Spring
Can be used for:
Panel-Mounted Sockets
Sockets Mounted to 35mm DIN Rail (You will need two 8-32 x 3/4 machine screws with washers & nuts from your hardware provider) |
70166 |
 |
|
DIN Rail Adaptor Kit
Quick & Economical Way to Install Any THx Series 2” x 2” Encapsulated Time Delay Relays on 35mm DIN Rail
Clip Comes with a Threaded Hole to Eliminate Need for a Washer & Nut
All Mounting Hardware Included |
70500 |
 |
|
Panel Mount Assembly For Panel Mounting Standard Plug-in Products
This assembly provides a simple & economical method to mount plug-in products to the deadfront of an enclosure/panel:
Sturdy Aluminum Construction u Stainless Steel Studs
All Mounting Hardware Included
White Textured Painted Finish
2 3/16” W x 3 7/16” H |
70400 |
 |
 |
