| Wago Fieldbus Coupler - INTERBUS ECO 500 Kbaud |
 |
| Part Number |
Standard |
Conformity Marking |
Approvals |
 750-344 |
EN 50254 |
 |
cULus,
cULus-EX,
KEMA |
| INTERBUS ECO FIELDBUS COUPLER 500 kBaud CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION |
The ECO fieldbus coupler is designed for applications with a reduced scale I/O requirement. Using digital only process data or small amounts of analogs, while retaining all of the choice that’s offered by the Series 750 I/O.
The coupler has an integrated supply terminal for the system voltage. The field power jumper contacts are supplied via a separate supply module.
The INTERBUS bus coupler automatically configures, creating a local process image which may include analog, digital or specialty modules.
INTERBUS allows the storing of the process image in the corresponding Master control (PLC, PC or NC).
The local process image is divided into two data zones containing the data received and the data to be sent. The process data can be sent via the INTERBUS fieldbus to the PLC, PC or NC for further processing, and received from the field via INTERBUS.
The data of the analog modules is stored in the process image which is created automatically according to the order in which the modules are connected to the buscoupler. The bits of the digital modules are sent byte by byte and added to the analog data. If the amount of digital information exceeds 8 bits, the buscoupler automatically starts with a new byte. |
|
| Technical Information |
| Characteristic |
Value |
| Max. no. of nodes |
256 |
| Max. no. Of I/O points |
4096 (depends on Master) |
| Transmission medium |
certified Cu cable |
| Max. length of fieldbus segment |
400 m |
| Data transmission rate (kBaud) |
500 kBaud |
| Transmission time |
typ. 1.43 ms (10 Module; 32 I, 32 O/Mod) |
| Buscoupler connection |
1 x D-SUB 9; plug for input interface 1 x D-SUB 9; socket for output interface |
| UL 508 |
E175199, UL 508 |
| Standard |
EN 50254 |
| Certification |
INTERBUS CLUB |
| Conformity marking |
CE |
| Max. no. of I/O modules |
64 |
| Max. fieldbus input image (Byte) |
20 Byte |
| Max. fieldbus output image (Byte) |
20 Byte |
| Configuration |
via PC or PLC |
| Voltage supply |
DC 24 V (-15% / + 20%) |
| Input current (max) |
260 mA |
| Efficiency of the power supply |
80% |
| Internal current consumption |
350 mA |
| Total current for the I/O modules |
650 mA |
|
| Characteristic |
Value |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
| EMC emission of interference |
acc. EN 50081-2 (94) |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
1.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Weight |
115 g |
| Color |
light gray |
| Height |
65 mm |
| Height |
2.56 in |
| Width |
50 mm |
| Width |
1.969 in |
| Depth |
97 mm |
| Depth |
3.819 in |
| Strip length from |
5 mm |
| Strip length to |
6 mm |
| Strip length |
0.22 in |
|
|
