| Wago Fieldbus Coupler - ETHERNET TCP/IP 10/100 Mbits/s |
 |
| Part Number |
Conformity Marking |
Approvals |
 750-341 |
 |
cULus, |
| ETHERNET TCP/IP FIELDBUS COUPLER 10/100 Mbit/s CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION |
This buscoupler allows connection of the WAGO-I/O-SYSTEM as a slave to the ETHERNET fieldbus.
The buscoupler is capable of supporting all the I/O modules. The buscoupler automatically configures, creating a local process image which may include analog, digital or specialty modules. Analog and specialty module data is sent via words and/ or bytes, digital data is sent bit by bit.
This buscoupler is suitable for data rates of 10 Mbit /s and 100 Mbit /s. The buscoupler offers many different application protocols which can be used for data acquisition or control (MODBUS, ETHERNET / IP) or for system managing and diagnostics (HTTP, BootP, DHCP, DNS, SNTP, FTP and SNMP). HTML pages can be placed on an internal server for use in Web-based applications. |
|
| Technical Information |
| Characteristic |
Value |
| Max. no. of nodes |
limited by ETHERNET- Specification |
| Transmission medium |
Twisted Pair S-UTP 100 Ohm Cat 5 |
| Buscoupler connection |
RJ45 |
| Max. length of fieldbus segment |
100 m between hub and
750-342 max. length of network limited by Ethernet specification |
| Baud rate |
10/100/Mbit/s |
| Protocols |
MODBUS / TCP (UDP), ETHERNET / IP, HTTP, BootP, DHCP, DNS, SNTP, FTP, SNMP, SMTP |
| UL 508 |
E175199, UL 508 |
| Conformity marking |
CE |
| Max. no. of I/O modules |
64 |
| Max. no. of I/O modules with bus extension |
250 |
| Digital signals |
max. 2040 (inputs and outputs) |
| Analog signals |
max. 1020 (inputs and outputs) |
| Configuration |
through the computer |
| Voltage supply |
DC 24 V (-15% / + 20%) |
| Input current (max) |
500 mA |
| Efficiency of the power supply |
87% |
| Internal current consumption |
300 mA |
| Total current for the I/O modules |
1700 mA |
| Isolation |
500 V system / supply |
| Voltage via power jumper contacts (max) |
DC 24 V (-15% / + 20%) |
|
| Characteristic |
Value |
| Current via power jumper contacts (max) |
DC 10 A |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
gem. EN 50082-2 (1996), EN 61000-6-2 (1999) |
| EMC emission of interference |
acc. EN 50081-2 (94) |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Weight |
179.5 g |
| Color |
light gray |
| Height |
65 mm |
| Height |
2.56 in |
| Width |
51 mm |
| Width |
2.008 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
