| Wago Fieldbus Coupler - PROFINET I/O FIELDBUS COUPLER |
 |
| Part Number |
Approvals - Conformity Marking |
 750-340 |
 |
 |
UL 508
EN 30079-15 |
| PROFINET IO FIELDBUS COUPLER 10/100 Mbits/s DIGITAL AND ANALOG SIGNALS |
This fieldbus coupler connects the WAGO-I/O-SYSTEM as a slave to the PROFINET IO Industrial ETHERNET standard for automation. The fieldbus coupler supports all WAGO-I/O-SYSTEM modules. The coupler automatically configures, creating a local process image which may include analog, digital, or specialty modules. Analog and specialty module data is sent via words and/or bytes; digital data is sent bit by bit. The fieldbus coupler is integrated into the application as a PROFINET IO device.
The coupler also supports many common ETHERNET protocols for system management and diagnostics (HTTP, BootP, DHCP, DNS, SNTP, FTP, and SNMP). |
|
| Technical Information |
| Characteristic |
Value |
| No. of couplers connected to Master |
limited by ETHERNET specification |
| Transmission medium |
Twisted Pair S-UTP 100 Ohm cat. 5 |
| Max. length of fieldbus segment |
100 m between hub station and
750-340 max. length of network limited by ETHERNET specification |
| Baud rate |
10/100 Mbits/s |
| Buscoupler connection |
RJ-45 |
| Protocols |
PROFINET RT V 2.0, HTTP, DHCP, DNS, SNTP, FTP, SNMP |
| Max. no. of I/O modules |
64 |
| Max. no. of I/O modules with bus extension |
250 |
| Max. input process image |
2 Kbytes |
| Max. output process image |
2 Kbytes |
| Configuration |
via PC |
| Voltage supply |
DC 24 V (-15% / + 20%) |
| Input current (max) |
500 mA |
| Efficiency of the power supply |
87% |
| Internal current consumption |
300 mA |
| Total current for the I/O modules |
1700 mA |
| Isolation |
500 V system / supply |
| Voltage via power jumper contacts (max) |
DC 24 V (-15% / + 20%) |
|
| Characteristic |
Value |
| Current via power jumper contacts (max) |
DC 10 A |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC CE-immunity to interference |
acc. EN 61000-6-2 (1999) |
| EMC CE-Emission of interference |
acc. EN 50081-2 (1994) |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Color |
light gray |
| Height |
65 mm |
| Width |
51 mm |
| Depth |
100 mm |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Weight |
179.5 g |
|
|
