| Wago Fieldbus Coupler - INTERBUS 500 Kbaud |
 |
| Part Number |
Standard |
Cert. |
Conformity Marking |
Approvals |
 750-304 |
EN 50254 |
INTERBUS
CLUB |
 |
cULus,
cULus-EX,
KEMA |
| INTERBUS FIELDBUS COUPLER DIGITAL AND ANALOG SIGNALS CAGE CLAMP CONNECTION |
This buscoupler allows connection of the WAGO-I/O-SYSTEM as a slave to the INTERBUS fieldbus.
The buscoupler automatically configures, creating a local process image which may include analog, digital or specialty modules. Analog and specialty module data is sent via words and/or bytes, digital data is sent bit by bit.
INTERBUS stores the process image in the corresponding Master control (PLC, PC or NC).
The local process image is divided into two data zones containing the data received and the data to be sent. The process data can be sent via the INTERBUS fieldbus to the PLC, PC or NC for further processing, and received from the field via INTERBUS.
The data of the analog modules is stored in the process image which is created automatically according to the order in which the modules are connected to the buscoupler. The bits of the digital modules are sent byte by byte and added to the analog data. If the amount of digital information exceeds 8 bits, the buscoupler automatically starts with a new byte. |
|
| Technical Information |
| Characteristic |
Value |
| Max. no. of nodes |
256 |
| Max. no. Of I/O points |
4096 (depends on Master) |
| Transmission medium |
certified Cu cable |
| Max. length of fieldbus segment |
400 m |
| Data transmission rate (kBaud) |
500 kBaud |
| Transmission time |
typ. 1.43 ms (10 Module; 32 I, 32 O/Mod) |
| Buscoupler connection |
1 x D-SUB 9; plug for input interface 1 x D-SUB 9; socket for output interface |
| UL 508 |
E175199, UL 508 |
| UL 1604 |
E198726, UL 1604 Class 1 Dev2 ABCD T4A |
| KEMA |
01ATEX1024X Eex nA II T4 |
| Standard |
EN 50254 |
| Certification |
INTERBUS CLUB |
| Conformity marking |
CE |
| Max. no. of I/O modules |
64 |
| Max. fieldbus input image (Byte) |
64 Byte |
| Max. fieldbus output image (Byte) |
64 Byte |
| Configuration |
via PC or PLC |
| Voltage supply |
DC 24 V (-15% / + 20%) |
| Input current (max) |
500 mA |
| Efficiency of the power supply |
87% |
| Internal current consumption |
300 mA |
| Total current for the I/O modules |
1700 mA |
|
| Characteristic |
Value |
| Isolation |
500 V system / supply |
| Voltage via power jumper contacts (max) |
DC 24 V (-15% / + 20%) |
| Current via power jumper contacts (max) |
DC 10 A |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
| EMC emission of interference |
acc. EN 50081-2 (94) |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Voltage CSA |
24 V |
| Weight |
192 g |
| Color |
light gray |
| Height |
65 mm |
| Height |
2.56 in |
| Width |
51 mm |
| Width |
2.008 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
