Connex-Electronics.com
Wago
Wago IO System - Programmable Fieldbus Controller

Wago Programmable Fieldbus Controller
Wago 750-812
Part Number Conformity Marking Approvals
Add part number 750-812 to your Quote. 750-812 CE cULus,
ABS*, BV*, DNV*,
GL*, LR*, RINA*,
cULus-EX,
KEMA
Add part number 750-626 to your Quote. 750-626 filter module is absolutely necessary
MODBUS PROGRAMMABLE FIELDBUS CONTROLLER RS 485 / 150 - 19200 Baud CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION
The programmable fieldbus controller for MODBUS is an expansion of the WAGO-I/O-SYSTEM. This controller combines the WAGO fieldbus coupler for MODBUS with the functionality of a PLC. Programming of the application is done with WAGO-I/O-PRO 32 in accordance with IEC 61131-3, covering all 5 programming languages. The programmer can access all fieldbus and I/O data. Characteristics and use:
l The use of decentralized control can better support a PLC or PC
l Signal pre-processing reduces fieldbus transmissions
l Complex applications can be divided into multiple tasks
l Tasks can be prioritized
l Peripheral equipment can be controlled directly, resulting in faster system response times
l Programmable response in the event of a fieldbus failure
l Simple, self-sufficient control
Technical Information
Characteristic Value
Max. no. of nodes 99 with repeater
Max. no. Of I/O points ca. 6000 (depends on Master)
Transmission medium shielded Cu-cable 2 (4) x 0.25 mm²
Max. length of fieldbus segment 1200 m (depends on the baud rate / on the cable)
Baud rate 150 (1200) Baud ... 19.2 (115.2) kBaud
Buscoupler connection 1 x D-SUB 9; socket
Programming WAGO-I/O-PRO 32
IEC 61131-3 AWL, KOP, PUP, ST, AS
UL 508 E175199, UL 508
Conformity marking CE
Max. no. of I/O modules 64
Max. fieldbus input image (Byte) 1024 Byte
Max. fieldbus output image (Byte) 1024 Byte
Input variables 512 Byte
Output variables 512 Byte
Configuration automatic and via switches
Program memory 32 kByte
Data memory 32 kByte
Non-volatile memory (retain) 8 kByte
Cycle time < 3 ms for 1000 statements / 256 dig. I/Os
Voltage supply DC 24 V (-25% / + 30%)
Input current (max) 500 mA
Efficiency of the power supply 87%
Total current for the I/O modules 1650 mA
Isolation 500 V system / supply
Voltage via power jumper contacts (max) DC 24 V (-25% / + 30%)
Characteristic Value
Current via power jumper contacts (max) DC 10 A
Operating temperature 0 °C ... + 55 °C
Storage temperature -25 °C ... +85 °C
Relative air humidity 95%
Vibration resistance acc. IEC 60068-2-6
Shock resistance acc. IEC 60068-2-27
Degree of protection IP 20
EMC immunity to interference acc. EN 50082-2 (96)
EMC emission of interference per EN 50081-1 (93)
EMC marine applications - noise proof gem. Germanischer Lloyd (1997)
EMC marine applications - noise transmission gem. Germanischer Lloyd (1997)
Cross section from [mm²] 0.08 mm²
Cross section to [mm²] 2.5 mm²
Cross section from [AWG] 28 AWG
Cross section to [AWG] 14 AWG
Weight 205 g
Color light gray
Height 65 mm
Height 2.56 in
Width 51 mm
Width 2.008 in
Depth 100 mm
Depth 3.937 in
Strip length from 8 mm
Strip length to 9 mm
Strip length 0.33 in