| Wago Main Page |
| I/O Products |
|
| Fieldbus Coupler |
| Programmable Feildbus Controller |
| Digital Input Modules |
| Digital Output Modules |
 |
| 1 Channel |
| 230V AC, 16A, relay 1a |
| 2 Channel |
| 24V DC,
0.5A |
| 24V DC, 2.0A |
| 24V DC,
0.5A, diagnostics |
| 24V DC,
2.0A, diagnostics |
| 24V DC,
EEx i |
| 125V AC,
0.5A, relay 2 CO contacts, pot. free |
| 230V AC,
1.0A relay 2 CO contacts, pot. free |
| 230V AC,
0.3A, solid state relay |
| 230V AC,
3.0A, solid state relay for 30s |
| 230V AC,
2.0A, relay 2 NO |
| 230V AC,
2.0A, relay 2 NO, pot. free |
| 4 Channel |
| 5V DC, 20
mA |
| 24V DC,
0.5A |
| 24V DC,
0.5A, 2-conductor |
| 24V DC,
0.5A, low-side switching |
| 8 Channel |
| 24V DC,
0.5A |
|
|
| Analog Input Modules |
| Analog Output Modules |
| Specialty Modules |
| System Modules |
| Approvals |
|
| Wago Digital Output Modules |
 |
| Part Number |
Conformity Marking |
Approvals |
 750-523 |
 |
cULus |
| 1-CHANNEL RELAY OUTPUT MODULE RELAY 1a POTENTIAL FREE CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION |
A connected actuator or load is switched via the relay output module. The DC 24 V supply is derived from the power jumper contacts to trigger the relays. The switched status of the relay is shown by the manual switch (1/0). The operating mode can be selected using the manual /automatic switch. The mode status is indicated by a LED and via status bits in the process image.
Manual:
Coil triggering is interrupted. Operation is only possible via the red manual switch.
Auto:
The relay is operated via the control system. Manual status transitions via the manual switch are reset by the control system after less than 500ms.
The manual witch can also be used without 24 V supply to switch the output ON. The relay meets both international standards of IEC and DIN EN 61810 part 1 /VDE 0435 part 201 as well as overload and short circuit requirements of IEC and DIN EN 61036 /61037. |
|
| Technical Information |
| Characteristic |
Value |
| Number of outputs |
1 MAKE CONTACTS |
| CURRENT CONSUMPTION (INTERNAL) mA |
5 mA |
| Switching voltage |
AC 440 V |
| Switching power max. (VA) |
5 VA |
| Switching current (max) |
AC 16 A |
| Current consumption max (field side) |
80 mA |
| Contact material |
AgSnO2 |
| Isolation |
1.5 kV EFF. (FIELD/SYSTEM), 2.5 kV RATED SURGE VOLTAGE; OVERVOLTAGE CATEGORY III |
| Mechanical life |
10^6 |
| Data size |
2 BITS IN (MANUAL STATUS, - ); 2 BITS OUT (DO, - ) |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
| EMC emission of interference |
per EN 50081-1 (93) |
| UL 508 |
E175199, UL 508 |
| Conformity marking |
CE |
| Incandescent lamp (operations 100,000) |
1.25 kW |
| Incandescent lamp (operations 30,000) |
2.5 kW |
| Fluorescent lamp, not compensated (operations 100,000) |
1.2 kW |
| Fluorescent lamp, not compensated (operations 30,000) |
2.5 kW |
| Fluorescent lamp, parallel compensated (operations 100,000) |
650 W / 70 ?F |
| Fluorescent lamp, parallel compensated (operations 30,000) |
1,3 kW / 140 ?F |
| Fluorescent lamp, dual circuit (operations 100,000) |
2 x 1,2 kW |
| Fluorescent lamp, dual circuit (operations 30,000) |
2 x 2,5 kW |
| Halogen lamp (AC 230 V) (operations 100,000) |
1.2 kW |
|
| Characteristic |
Value |
| Halogen lamp (AC 230 V) (operations 30,000) |
2.5 kW |
| Low-voltage halogen lamp with transformer (operations 100000) |
500 VA |
| Low-voltage halogen lamp with transformer (operations 30,000) |
500 VA |
| Mercury arc/sodium-vapor lamp, not compensated (operations 100,000) |
1 kW |
| Mercury arc/sodium-vapor lamp, not compensated (operations 30,000) |
2 kW |
| Mercury arc/sodium-vapor lamp, parallel compensated (operations 100,000) |
1 kW / 70 ?F |
| Mercury arc/sodium-vapor lamp, parallel compensated (operations 30,000) |
2 kW / 140 ?F |
| Duluxe lamp, not compensated (operations 100,000) |
800 W |
| Duluxe lamp, uncompensated (operations 30,000) |
1.6 kW |
| Duluxe lamp, parallel compensated (operations 100,000) |
560 W / 70 ?F |
| Duluxe lamp, parallel compensated (operations 30,000) |
1,1 kW / 140 ?F |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Weight |
105 g |
| Color |
light gray |
| Height |
64 mm |
| Height |
2.52 in |
| Width |
24 mm |
| Width |
0.945 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
|
