| Wago Digital Output Modules |
 |
| Part Number |
Conformity Marking |
Approvals |
 750-519 |
 |
cULus,
cULus-EX
KEMA |
| 4-CHANNEL DIGITAL OUTPUT MODULE DC 5 V POSITIVE SWITCHING CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION |
| The connected load is switched via the digital output from the control system. All outputs are electronically short-circuit-protected. The module is a 4-channel, 2 conductor device. Each input is electrically isolated from the bus by use of optocouplers. Attention: An additional supply module must be added for operation with DC 5 V! |
|
| Technical Information |
| Characteristic |
Value |
| No. of outputs |
4 |
| CURRENT CONSUMPTION (INTERNAL) mA |
10 mA |
| Voltage via power jumper contacts (max) |
DC 5 V |
| Type of load |
resistive, inductive, lamps |
| Max. switching frequency (kHz) |
5 kHz |
| Output current max. |
20 mA short-circuit protected |
| Isolation |
500 V system / supply |
| Current consumption max (field side) |
14 mA |
| Internal data width (Bit) |
4 Bit |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
|
| Characteristic |
Value |
| EMC emission of interference |
per EN 50081-1 (93) |
| UL 508 |
E175199, UL 508 |
| Conformity marking |
CE |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Voltage CSA |
5 V |
| Current rating CSA |
20 A |
| Color |
light gray |
| Height |
64 mm |
| Height |
2.52 in |
| Width |
12 mm |
| Width |
0.472 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
