Connex-Electronics.com
Wago
Wago IO System - Digital Input Modules

Wago Digital Input Modules
Wago 750-422
Part Number Conformity Marking Approvals
Add part number 750-422 to your Quote. 750-422 CE cULus,
cULus-EX,
KEMA
4-CHANNEL DIGITAL INPUT MOUDLE DC 24 V POSITIVE SWITCHING CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION
The digital input module receives control signals from digital field devices (sensors, etc.). This input module extends input signals to at least 10 ms. Only signals ³ 1 ms will be acquired. Input signals > 10 ms will not be extended (see timing technical data). An optocoupler is used for electrical isolation between the bus and the field side.
Technical Information
Characteristic Value
No. of inputs 4
CURRENT CONSUMPTION (INTERNAL) mA 9 mA
Voltage via power jumper contacts (max) DC 24 V (-15% / + 20%)
Signal voltage (0) DC -3 V ... +5 V
Signal voltage (1) DC 15 V ... 30 V
Input filter 1,0 ms (+/- 15 %)
Current supply (typ) 4 mA
Input frequency (max) 80
Dead time 1 ms
t on(in) < 1ms t on (out) = 0
1 ms < t on(in) < 10 ms t on(out) = 10 ms (+ - 15 %)
t on(in) > 10 ms t on(out) = t on(in)
Pulse extension SEE GRAPHIC
Isolation 500 V system / supply
Internal data width (Bit) 4 Bit
Operating temperature 0 °C ... + 55 °C
Storage temperature -25 °C ... +85 °C
Relative air humidity 95%
Vibration resistance acc. IEC 60068-2-6
Shock resistance acc. IEC 60068-2-27
Degree of protection IP 20
Characteristic Value
EMC immunity to interference acc. EN 50082-2 (96)
EMC emission of interference per EN 50081-1 (93)
UL 508 UL 508
Conformity marking Conformity marking
Cross section from [mm²] Cross section from [mm²]
Cross section to [mm²] Cross section to [mm²]
Cross section from [AWG] Cross section from [AWG]
Cross section to [AWG] Cross section to [AWG]
Weight Weight
Color Color
Height Height
Height Height
Width Width
Width Width
Depth Depth
Depth Depth
Strip length from Strip length from
Strip length to Strip length to
Strip length Strip length