| Wago Main Page |
| I/O Products |
|
| Fieldbus Coupler |
| Programmable Feildbus Controller |
| Digital Input Modules |
 |
| 1 Channel |
| NAMUR,
EEx i |
| 2 Channel |
| 24V DC, 3.0 ms |
| 24V DC, 0.2 ms |
| 24V DC, 3.0 ms, proximity
switch |
| 24V DC, 0.2 ms, proximity
switch |
| 24V DC, 3.0 ms, diagnostics,
acknowledgment |
| 24V DC, 3.0 ms, diagnostics |
| 24V DC, intruder detection |
| 48V DC, 3.0 ms |
| 110V DC, high-side/low-side
switching |
| 120V DC |
| 230V DC |
| NAMUR |
| 4 Channel |
| 5V DC, 0.2 ms |
| 24V DC, 3.0 ms |
| 24V DC, 0.2 ms |
| 24V DC, 3.0 ms, 2-conductor |
| 24V DC, 0.2 ms, 2-conductor |
| 24V DC, pulse extension |
| 24V DC, 3.0 ms, low-side switching |
| 24V DC, 0.2 ms, low-side switching |
| 24V AC/DC, 20 ms |
| 24V AC/DC, pow. contacts 50 ms |
| 42V AC/DC |
| 8 Channel |
| 24V DC, 3.0 ms |
| 24V DC, 0.2 ms |
|
|
| Digital Output Modules |
| Analog Input Modules |
| Analog Output Modules |
| Specialty Modules |
| System Modules |
| Approvals |
|
| Wago Digital Input Modules |
 |
| Part Number |
Conformity Marking |
Approvals |
 750-405 |
 |
cULus,
ABS, BV, DNV,
GL, LR, RINA,
cULus-EX,
KEMA |
| 2-CHANNEL DIGITAL INPUT MODULE AC 230 V CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION 2- TO 4-CONDUCTOR-CONNECTION |
| The digital input module receives control signals from digital field devices (sensors, etc.). The module is a 2-channel, 4-conductor device and sensors with a ground (earth) wire may be directly connected to the module. An optocoupler is used for electrical isolation between the bus and the field side. Attention: An additional supply module must be added for operation with AC 230 V! |
|
| Technical Information |
| Characteristic |
Value |
| No. of inputs |
2 |
| CURRENT CONSUMPTION (INTERNAL) mA |
2 mA |
| Voltage via power jumper contacts (max) |
AC 230 V (-15 % / +20 %); (+20 % 1,5 s) |
| Signal voltage (0) |
AC 0 V .. 40 V |
| Signal voltage (1) |
AC 79 V ... 1.1 Un |
| Switching time |
10 ms |
| Current supply (typ) |
6.5 mA |
| Input frequency (max) |
f (nominal) +- 10 % 50 Hz +- 10 % 60 Hz +- 10 % |
| Isolation |
1.5 kV EFF. (FIELD/SYSTEM), 2.5 kV RATED SURGE VOLTAGE; OVERVOLTAGE CATEGORY III |
| Internal data width (Bit) |
2 Bit |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
| EMC emission of interference |
per EN 50081-1 (93) |
| UL 508 |
E175199, UL 508 |
| EMC marine applications - noise proof |
gem. Germanischer Lloyd (1997) |
|
| Characteristic |
Value |
| UL 1604 |
E198726, UL 1604 Class 1 Dev2 ABCD T4A |
| EMC marine applications - noise transmission |
gem. Germanischer Lloyd (1997) |
| KEMA |
01ATEX1024X Eex nA II T4 |
| Conformity marking |
CE |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Voltage CSA |
230 V |
| Weight |
50 g |
| Color |
light gray |
| Height |
64 mm |
| Height |
2.52 in |
| Width |
12 mm |
| Width |
0.472 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
|
