| Wago System Modules |
 |
| Part Number |
Conformity Marking |
Approvals |
 750-622 |
 |
cULus,
KEMA |
| BINARY SPACER MODULE WITH SUPPLY MODULE CAGE CLAMP CONNECTION |
| The binary spacer module reserves bit addresses in the process image of a fieldbus node. The operating mode as well as the bit width can be adjusted by DIP switches on the side of the module. The operating mode (inputs/outputs) can be chosen by one DIP switch, the number of inputs or outputs (2,4,6 or 8) can be chosen by two DIP switches. The configuration is indicated by means of 3 LEDs. The binary spacer module can also act as a power supply module, providing a voltage of 24 V via the power jumper contacts. |
|
| Technical Information |
| Characteristic |
Value |
| CURRENT CONSUMPTION (INTERNAL) mA |
10 mA |
| Voltage supply via power jumper contacts (max) |
DC 24 V (-15% / + 20%) |
| Current via power jumper contacts (max) |
DC 10 A |
| Isolation |
500 V system / supply |
| Internal data width |
2, 4, 6 or 8 Bit |
| Operating temperature |
0 °C ... + 55 °C |
| Bit width |
2 Bit: OFF/OFF ; 4 Bit: ON/OFF ; 6 Bit: OFF/ON ; 8 Bit ON/ON |
| Operating mode |
Eingänge DIP 3 OFF ; Ausgänge DIP 3 ON |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
| EMC emission of interference |
per EN 50081-1 (93) |
|
| Characteristic |
Value |
| UL 508 |
E175199, UL 508 |
| KEMA |
01ATEX1024X Eex nA II T4 |
| Conformity marking |
CE |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Voltage CSA |
24 V |
| Weight |
48 g |
| Color |
light gray |
| Height |
64 mm |
| Height |
2.52 in |
| Width |
12 mm |
| Width |
0.472 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
