| Wago Analog Input Modules |
 |
| Part Number |
Conformity Marking |
Approvals |
 750-469 |
 |
cULus,
ABS, BV, DNV,
GL, LR, RINA,
KEMA |
| Thermocouple K diag. |
750-469 |
| Thermocouple S diag. |
750-469/000-001 |
| Thermocouple T diag. |
750-469/000-002 |
| ±120mV diag. |
750-469/000-003 |
| Thermocouple J diag. |
750-469/000-006 |
| Thermocouple E diag. |
750-469/000-008 |
| Thermocouple L diag. |
750-469/000-012 |
| Thermocouple K diag. S5 |
750-469/000-200 |
| Thermocouple J diag. S5 |
750-469/000-206 |
| Thermocouple Free config. |
750-469/003-000 |
|
| 2-CHANNEL ANALOG INPUT MOUDLE TERMOCOUPLE / K / DIAGN. CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION |
| The thermocouple input module allows the direct connection of two thermocouples. Cold junction compensation is utilized to compensate for the clamping unit offset voltage over the 0 °C ... 55 °C operating range. The module linearizes the entire temperature range automatically. A line break is indicated by a red LED. A green LED indicates readiness for operation and trouble-free communication with the buscoupler. The shield (screen) is directly connected to the DIN rail. |
|
| Technical Information |
| Characteristic |
Value |
| No. of inputs |
2 |
| Voltage supply |
via system voltage DC / DC |
| Current consumption typ (internal) |
65 mA |
| Sensor types |
TYPE K; -100°C ... +1370°C (FACTORY PRESET), J, B, E, N, R, S, T, U, L |
| Cold junction compensation |
at each pair of terminal blocks |
| Resolution (over the complete area) |
0,1 °C |
| Conversion time |
320 MS (BOTH CHANNELS) |
| Measuring error (25°) |
< +/- 0.4 % of the full scale value |
| Temperature coefficient |
< +/- 0.01 % / K of the full scale value |
| Isolation |
500 V system / supply |
| Data size |
2 x 16 Bit Data2 x 8 Bit control / status (optional) |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
| EMC emission of interference |
per EN 50081-1 (93) |
|
| Characteristic |
Value |
| UL 508 |
E175199, UL 508 |
| EMC marine applications - noise proof |
gem. Germanischer Lloyd (1997) |
| KEMA |
01ATEX1024X Eex nA II T4 |
| EMC marine applications - noise transmission |
gem. Germanischer Lloyd (1997) |
| Conformity marking |
CE |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Voltage CSA |
24 V |
| Weight |
38.232 g |
| Color |
light gray |
| Height |
64 mm |
| Height |
2.52 in |
| Width |
12 mm |
| Width |
0.472 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
