Connex-Electronics.com
Weidmuller Products, when good enough just isn't good enough!
Weidmuller Products

Back to Weidmuller Main Selection Page
Weidmuller Power Supplies Main Selection Page
Introduction - Power Delivery Solutions
General Purpose Power Supplies
Single Phase Input
Info & Selection Chart
24-28VDC Output / 3A
24-28VDC Output / 5A
24-28VDC Output / 10A
24-28VDC Output / 20A
Three Phase Input
24-28VDC Output / 10A
24-28VDC Output / 20A
24-28VDC Output / 40A
Advanced Features Power Supplies
Single Phase Input
Info & Selection Chart
5VDC Output / 2A
5VDC Output / 3A
5VDC Output / 8A
12VDC Output / 1.5A
12-15VDC Output / 3A
12VDC Output / 10A
24VDC Output / 0.5A
24VDC Output / 1A
24-28VDC Output / 2.3A
24-28VDC Output / 6.5A
22-28VDC Output /
10.7-13.6A
48VDC Output / 1.04A
48VDC Output / 3.25A
Three Phase Input
24VDC Output / 2.3A
24-28VDC Output / 6.5A
23-28VDC Output / 12.5A
23-28VDC Output / 25A
23-28VDC Output / 40A
Pro-M Series Power Supplies
Pro-M Series Introduction
Single Phase Input
24VDC Output / 3A
24VDC Output / 5A
24VDC Output / 7.5A
24VDC Output / 10A
24VDC Output / 20A
24VDC Output / 40A
Three Phase Input
24VDC Output / 5A
24VDC Output / 10A
24VDC Output / 20A
24VDC Output / 40A
T-Series High Performance Industrial Power Supplies with Hazardous Approvals
T-Series Introduction
Single Phase Input
12VDC Output / 6A
12VDC Output / 12A
24VDC Output / 3.8A
24VDC Output / 7.5A
24VDC Output / 15A
24VDC Output / 25A
48VDC Output / 4A
48VDC Output / 7.5A
48VDC Output / 12.5A
T-Series Redundancy Modules
Redundancy Modules
DC-DC Converters
Introduction - DC-DC Converters
12VDC Input DC-DC Converters
24VDC Input DC-DC Converters
Diode Modules
Diode Modules for Redundancy
Battery Back Up Units (BBUs)
Introduction - Battery Back Up Units (BBUs)
Battery Back Up Units (BBUs)
Electronic Fusing System WAVEGUARD
Introduction - Electronic Fusing System
WAVEGUARD Electronic Fusing Modules
  Power Supplies
Part Number: Add part number 9928890015 to your Quote. 9928890015
CP-SNT 24 W 15V 1.5A
Representative Photo

Technical Information

Power Supply Type Switchmode
Input Voltage 85...265 VAC / 120...300 VDC
Output Voltage 15 VDC
Output Current Rating 1.5 A
Housing Type CP

Additional Data
   

Rail Type 35 mm DIN-rail
Input Voltage, Minimum 85 VAC / 120 VDC
Input Voltage, Typical 115/230 VAC ±10%
Input Voltage, Maximum 265 VAC / 300 VDC
Input Voltage/Current at 120 VAC 460 mA RMS (±20%)
Input Voltage/Current at 230 VAC 250 mA RMS (±20%)
Input Voltage/Current at 125 VDC 235 mA (±20%)
Input Voltage/Current at 250 VDC 120 mA (±20%)
Frequency 50/60 Hz
In-Rush Current Protection Thermistor
Overvoltage Protection Varistor
Fuse 2 A slow blow Wickmann 1937 4K (internal)
Switching Frequency 100 kHz PWM
Efficiency (at Maximum Load) 0.78
Maximum Ripple 0.2% RMS
Status Indicator Green, power on
Maximum Capacitive Load 8,000 µF
Load Share No
Load (10-100% Load) 0.005
85 VAC to 265 VAC Line 0.002
Overload Protection Overcurrent shutdown with automatic restart plus thermal shutdown.
Dielectric Strength Input to Output 3 kV RMS
Dielectric Strength I/O to DIN-Rail 4 kV RMS
Dielectric Strength Input to Ground 1.5 kV RMS
Dielectric Strength Output to Ground 500 V RMS
Storage Temperature Range -40°C...+85°C
Operating Temperature Range 0°C...+50°C full rated load
Wire Size #26...12 AWG
0.1...4.0 mm²
Mechanical Dimensions (LxWxH) mm (in.) 90.5/52/62.5 (3.56/2.05/2.46)
Certifications CSA , UL508 Listed, CE