Weidmuller Products, when good enough just isn't good enough!
Weidmuller Products

Back to Weidmuller Main Selection Page
Weidmuller Power Supplies Main Selection Page
Introduction - Power Delivery Solutions
General Purpose Power Supplies
Single Phase Input
Info & Selection Chart
24-28VDC Output / 3A
24-28VDC Output / 5A
24-28VDC Output / 10A
24-28VDC Output / 20A
Three Phase Input
24-28VDC Output / 10A
24-28VDC Output / 20A
24-28VDC Output / 40A
Advanced Features Power Supplies
Single Phase Input
Info & Selection Chart
5VDC Output / 2A
5VDC Output / 3A
5VDC Output / 8A
12VDC Output / 1.5A
12-15VDC Output / 3A
12VDC Output / 10A
24VDC Output / 0.5A
24VDC Output / 1A
24-28VDC Output / 2.3A
24-28VDC Output / 6.5A
22-28VDC Output /
48VDC Output / 1.04A
48VDC Output / 3.25A
Three Phase Input
24VDC Output / 2.3A
24-28VDC Output / 6.5A
23-28VDC Output / 12.5A
23-28VDC Output / 25A
23-28VDC Output / 40A
Pro-M Series Power Supplies
Pro-M Series Introduction
Single Phase Input
24VDC Output / 3A
24VDC Output / 5A
24VDC Output / 7.5A
24VDC Output / 10A
24VDC Output / 20A
24VDC Output / 40A
Three Phase Input
24VDC Output / 5A
24VDC Output / 10A
24VDC Output / 20A
24VDC Output / 40A
T-Series High Performance Industrial Power Supplies with Hazardous Approvals
T-Series Introduction
Single Phase Input
12VDC Output / 6A
12VDC Output / 12A
24VDC Output / 3.8A
24VDC Output / 7.5A
24VDC Output / 15A
24VDC Output / 25A
48VDC Output / 4A
48VDC Output / 7.5A
48VDC Output / 12.5A
T-Series Redundancy Modules
Redundancy Modules
DC-DC Converters
Introduction - DC-DC Converters
12VDC Input DC-DC Converters
24VDC Input DC-DC Converters
Diode Modules
Diode Modules for Redundancy
Battery Back Up Units (BBUs)
Introduction - Battery Back Up Units (BBUs)
Battery Back Up Units (BBUs)
Electronic Fusing System WAVEGUARD
Introduction - Electronic Fusing System
WAVEGUARD Electronic Fusing Modules
Power Supplies
Part Number: Add part number 1105850000 to your Quote. 1105850000
Weidmuller 1105850000
Representative Photo
CP-T SNT 180W 48V 4A
Technical Data
Input Specifications
Input voltage 115VAC/230VAC autoselect
Input voltage range 85-132/187-264 VAC autoselect (output current derating below 100VAC)
Input voltage frequency 47Hz - 63Hz
Harmonic limits EN 61000-3-2, Class A (for limited output power)
Hold up time 20ms min. 115/230 VAC
Inrush current <13A @ 115VAC; <25A @ 230VAC
Recommended Circuit breaker, Curve 1 or fuse, slow blow type 6A
Efficiency 87% typ.
Output Specifications
Output voltage 48 VDC
Output voltage adj. range 48-56 VDC
Output current 4.0A
Output power max. 180W
– Input variation
– Load variation (10–100 %)
0.5 % max.
0.5 % max.
Ripple and Noise (20MHz Bandwidth) 100 mV pk-pk typ. (200 mV pk-pk max. at I max)
Electronic short circuit protection Current limitation at I max ., constant current, automatic recovery
Output overvoltage protection 60V
Overload protection electronic overload protection
Overtemperature protection Switch off at overtemperature, automatic restart
Status indicator Dual color LED (green: DC ok; red: DC off)
Power OK signal
– trigger threshold:
– active output signal: (reference to –Vout)
– relay output
36-46 V
44.0 V ±4.0 V (15 mA max.)
rated: 48 VDC/0.5 A
General Specifications
Max. capacitive load unlimited
Operating temperature range –25 °C to +70 °C max. (–13 °F to +158°F)
Cooling convection cooling, no internal fan
Mounting TS35 DIN-rail (Horizontal) to allow for cooling
Storage temperature –25 °C to +85 °C (– 13°F to +185°F)
Humidity (non condensing) 95 % rel. H max.
Pollution degree 2
Temperature coefficient 0.02 %/K
Reliability, calculated MTBF @ 25°C acc. to IEC 61709 >0.9 Million hours, max. load
Remote On/Off by ext. contact.
DC on: -S contact open
DC off: -S connected via 1Kohm to -Vout
Isolation according to IEC/EN 60950-1, UL 60950-1, UL 508
– Vibration acc. IEC 60068-2-6;
– Shock acc. IEC 60068-2-27
3 axis, sine sweep, 10–55 Hz, 1 g, 1 oct/min
3 axis, 15 g half sine, 11 ms
Dimension (W x D x H) 54 x 110 x 110 mm
– Above/Below
– Sides
80 mm (3.15 in)
10 mm (0.39 in)
Weight 0.7kg
UL file E236157 cULus Listed to UL508, CSA C22.2 No. 14 UL file E255651 cRUus to ANSI/UL60950, CSA60950 CSA file 246286 CSA to C22.2 No. 107.1 CSA file 246286 cCSAus to CSA60950, ANSI/UL60950 CSA file 246286 cCSAus C1D2 to C22.2 No. 213 CSA file 246286 cCSAus C1Z2 to CSA60079-15 & ANSI/ISA 12.012.01 IEC file SI-1729 B3 CE marked