Connex-Electronics.com
Weidmuller Products, when good enough just isn't good enough!
Weidmuller Products

Back to Weidmuller Main Selection Page
Weidmuller Power Supplies Main Selection Page
Introduction - Power Delivery Solutions
General Purpose Power Supplies
Single Phase Input
Info & Selection Chart
24-28VDC Output / 3A
24-28VDC Output / 5A
24-28VDC Output / 10A
24-28VDC Output / 20A
Three Phase Input
24-28VDC Output / 10A
24-28VDC Output / 20A
24-28VDC Output / 40A
Advanced Features Power Supplies
Single Phase Input
Info & Selection Chart
5VDC Output / 2A
5VDC Output / 3A
5VDC Output / 8A
12VDC Output / 1.5A
12-15VDC Output / 3A
12VDC Output / 10A
24VDC Output / 0.5A
24VDC Output / 1A
24-28VDC Output / 2.3A
24-28VDC Output / 6.5A
22-28VDC Output /
10.7-13.6A
48VDC Output / 1.04A
48VDC Output / 3.25A
Three Phase Input
24VDC Output / 2.3A
24-28VDC Output / 6.5A
23-28VDC Output / 12.5A
23-28VDC Output / 25A
23-28VDC Output / 40A
Pro-M Series Power Supplies
Pro-M Series Introduction
Single Phase Input
24VDC Output / 3A
24VDC Output / 5A
24VDC Output / 7.5A
24VDC Output / 10A
24VDC Output / 20A
24VDC Output / 40A
Three Phase Input
24VDC Output / 5A
24VDC Output / 10A
24VDC Output / 20A
24VDC Output / 40A
T-Series High Performance Industrial Power Supplies with Hazardous Approvals
T-Series Introduction
Single Phase Input
12VDC Output / 6A
12VDC Output / 12A
24VDC Output / 3.8A
24VDC Output / 7.5A
24VDC Output / 15A
24VDC Output / 25A
48VDC Output / 4A
48VDC Output / 7.5A
48VDC Output / 12.5A
T-Series Redundancy Modules
Redundancy Modules
DC-DC Converters
Introduction - DC-DC Converters
12VDC Input DC-DC Converters
24VDC Input DC-DC Converters
Diode Modules
Diode Modules for Redundancy
Battery Back Up Units (BBUs)
Introduction - Battery Back Up Units (BBUs)
Battery Back Up Units (BBUs)
Electronic Fusing System WAVEGUARD
Introduction - Electronic Fusing System
WAVEGUARD Electronic Fusing Modules
  Power Supplies
Part Number: Add part number 9925340012 to your Quote. 9925340012
CP-SNT 160 W 12 VDC / 10 A
Representative Photo

Technical Information

Power Supply Type   Switchmode
Input Voltage   115 or 230 VAC (selectable) 50/60Hz
Output Voltage   12 VDC
Output Current Rating   10 A
Housing Type   CP

Additional Data

Rail Type   35 mm DIN-rail
Input Voltage, Minimum   85 VAC or 195 VAC
Input Voltage, Typical   115 or 230 VAC (selectable) ±10%
Input Voltage, Maximum   138 VAC or 250 VAC
Input Voltage/Current at 120 VAC   2.9A RMS (±20%)
Input Voltage/Current at 230 VAC   1.45 A RMS (±20%)
Frequency   50/60 Hz
In-Rush Current Protection   Thermistor
Overvoltage Protection   Varistor
Fuse   6.3 A slow fuse (internal)
Switching Frequency   65 kHz PWM
Efficiency (at Maximum Load)   85%
Maximum Ripple   0.2% RMS V p-p
Output Current (Max)   10 A
Maximum Capacitive Load   6,000 µF
Overload Protection   Overcurrent shutdown with automatic restart plus thermal shutdown / short circuit
Storage Temperature Range   -40°C...+85°C
Operating Temperature Range   -10°C...+50°C full rated load
Wire Size   #26...12 AWG
0.1...4.0 mm²
Mechanical Dimensions (LxWxH) mm (in.)   127/57/175 (5.00/2.24/6.89)
Certifications   CSA, UL 508 Listed, CE

Suggested Accessories
     

Chassis mounting kit: Add part number 7920560000 to your Quote. 7920560000
Side mount bracket - DIN Kit: Add part number 7940000542 to your Quote. 7940000542