| Wago Specialty Modules |
 |
| Part Number |
Conformity Marking |
Approvals |
 750-631 |
 |
cULus,
cULus-EX,
KEMA |
| Increment. Enc. Single Interpret.: |
750-631/000-001 |
|
| SERIAL INTERFACE CARRIER RAIL DIN 35 |
| This module is an interface for the connection of any incremental encoder (with line driver outputs). A 16 bit counter with quadrature encoder interface as well as a 16 bit latch for the zero impulse can be read, set, or enabled. The count of the counter will be transmitted fast and interference-free over the fieldbus to the PC, PLC, or NC. A counter lock-out is possible using input G. The module must be powered using an external 24 V DC power supply. It is then possible to supply the encoder with 24 V DC, or alternatively with 5 V DC derived internally from the terminations (Ue/U0). The shield (screen) is directly connected to the carrier rail. |
|
| Technical Information |
| Characteristic |
Value |
| Transmitter connection |
A, A*, B, B*, C, C |
| CURRENT CONSUMPTION (INTERNAL) mA |
25 mA |
| Signal voltage |
DC 5 V ... 24 V |
| Counter |
16 Bit binär |
| Max. operating frequency (kHz) |
1000 kHz |
| Quadrature decoder |
4-fold report |
| Zero impulse latch |
16 Bit |
| Commands |
Read, set, enable |
| Voltage supply |
DC 24 V (-15% / + 20%) |
| Current consumption typ. |
Time constant |
| Operating voltage of sensor |
DC 5 V |
| Sensor max. output current |
300 mA |
| Internal data width |
Internal bit width |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
|
| Characteristic |
Value |
| EMC emission of interference |
per EN 50081-1 (93) |
| UL 508 |
E175199, UL 508 |
| UL 1604 |
E198726, UL 1604 Class 1 Dev2 ABCD T4A |
| KEMA |
01ATEX1024X Eex nA II T4 |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Voltage CSA |
24 V |
| Weight |
105.2 g |
| Color |
light gray |
| Height |
64 mm |
| Height |
2.52 in |
| Width |
24 mm |
| Width |
0.945 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
