Walther Electric Pin & Sleeve Devices


Walther Electric Pin & Sleeve Devices - International Ratings

IEC-309 Pin and Sleeve Devices - North American Ratings

Introduction

20 Amps Rated Devices

30 Amps Rated Devices

60 Amps Rated Devices

100 Amps Rated Devices

Surface Mount Receptacles

CEEtyp - Test Plugs

CEEtyp - Phase Inverters

Back Boxes

Accessories

IEC-309 Pin and Sleeve Devices - International Ratings

16 Amps Rated Devices

32 Amps Rated Devices

63 Amps Rated Devices

125 Amps Rated Devices

Surface Mount Socket-Outlets

Reference Materials

Degrees of Protection Tables

Performance Specs.
(20 to 100 Amps) North American Ratings

Performance Specs.
(16 to 125 Amps) International Ratings

Drawings and Dimensions

IEC 309 Pin & Sleeve Devices - Degrees of Protection Reference Table

First Digit - Protection against persons - touching and ingress of solid objects		Second Digit - Protection against the penetration of liquids
		IP_0	IP_1	IP_2	IP_3	IP_4	IP_5	IP_6	IP_7	IP_8
		Non Protected	Protection against vertical falling of water drops	Protection against falling of water drops at an angle up to 15º from the vertical	Protection against spraying water (rain) at an angle up to 60º from the vertical	Protection against splashing water from any direction 360°	Protection against water jets from any direction 360°	Protection against heavy seas (waves)	Protection against effects of immersion in water under defined conditions of pressure and time	Protection against continuous submersion in water
IP0_	Without Protection	IP 00
IP1_	Protection against touching with the hand and solid objects greater than 50mm dia.	IP 10	IP 11	IP 12
IP2_	Protection against touching with the finger and solid objects greater than 12mm dia.	IP 20	IP 21	IP 22	IP 23
IP3_	Protection against touching with tools, wires, etc, more than 2.5mm thick and solid objects greater than 2.5mm dia.	IP 30	IP 31	IP 32	IP 33	IP 34
IP4_	Protection against touching with tools, wires, etc, more than 1mm thick and solid objects greater than 1mm dia.	IP 40	IP 41	IP 42	IP 43	IP 44
IP5_	Unlimited protection against contact with live parts and damaging deposits of dust	IP 50				IP 54	IP55
IP6_	Unlimited protection against contact with live parts and any protection of dust	IP 60					IP65	IP66	IP67	IP68

NEMA Designation	Intended Use and Description	Construction Requirements
3	Outdoor use primarily to provide a degree of protection against rain, sleet, windblown dust and damage from external ice formation.	Splashproof (IP44)
4	Indoor and outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, hose-directed water and damage from external ice formation.	Watertight (IP67)
4X	Indoor and outdoor use primarily to provide a degree of protection against corrosion, windblown dust and rain, splashing water, hose-directed water and damage from external ice formation.	Watertight (IP67)
6	Indoor and outdoor use primarily to provide a degree of protection against hose-directed water, and the entry of water during occasional temporary submersion at a limited depth and damage from external ice formation.	Watertight (IP67)
12, 12K	Indoor use primarily to provide a degree of protection against circulating dust, falling dirt, and dripping non-corrosive liquids.	Splashproof (IP44)

Thisinformationisprovidedonlyasageneralquide.Nospecificrecommendationisintended.Aseachapplicationmayvary,testingshouldbeconductedbytheuserintheintendedenvironment.