Connex-Electronics.com
Qualtek Products
Enclosed Frame Switching Power Supplies - QPD-35 (35 Watts - Single Output)

Enclosed Frame Switching Power Supplies - QPD-35 (35 Watts - Single Output)
   
Features:
  • Universal AC input/ Full range
  • No Load Power Consumption <0.5W
  • High Efficiency, and High Reliability
  • Output Protections: OLP/OVP/SCP
  • Wide operating ambient temperature (-25°C~70°C)
  • Operating Altitude up to 5000M
  • All using 105°C long life electrolytic capacitors.
  • 100% full load burn-in test
  • Withstand 300VA Surge Input for 5 Sec
  • PCB soldering side with conformal coating
Qualtek QPD-35
 
Approvals
 
Click here for specification and dimensions in .pdf formatPDF
Part Number Add part number QPD-35-5 to your Quote. QPD-35-5 Add part number QPD-35-12 to your Quote. QPD-35-12 Add part number QPD-35-15 to your Quote. QPD-35-15 Add part number QPD-35-24 to your Quote. QPD-35-24 Add part number QPD-35-48 to your Quote. QPD-35-48
Output Charateristics
DC Output 5V 12V 15V 24V 48V
Rated Current 6A 3A 2.4A 1.5A 0.76A
Current Range 0~6A 0~3A 0~2.4A 0~1.5A 0~0.76A
Ripple and Noise 0~70°C 50mV 80mV 120mV 120mV 180mV
-25~0°C 80mV 180mV 200mV 200mV 240mV
Voltage Adj. Range 4.75V~5.5V 11.4V~13.2V 14.3V~16.5V 22.8V~26.4V 45.6V~52.8V
Voltage Accuracy ±3% ±3% ±3% ±3% ±3%
Line Regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
Load Regulation ±1% ±1% ±1% ±1% ±1%
Set-up Time <1.0s (230VAC input, full load)
Hold-up Time >10ms (115VAC input, full load); >20ms (230VAC input, full load)
Temperature Coefficient ±0.03% / °C
Overshoot and Undershoot <5.0%
Input Characteristics
Voltage Range 90VAC~264VAC, 127-370VDC
Frequency Range 47Hz-63Hz
Efficiency (Typical) 115VAC Input 79% 83% 85% 86% 87%
230VAC Input 80% 84% 86% 87% 88%
AC Current (max) <1.0A
Inrush Current (Typical) <50A@230VAC Cold Start
Leakage Current Input-Output: <3.5mA / Input-PG: <0.25mA
Protection
Over Load (OLP) 105%~150% of rated output current, hiccup mode, auto recovery
Over Voltage (OVP) 105%~150% of rated output voltage, constant voltage
Short Circuit (SCP) Long-term mode, auto recovery
Environmental Characteristics
Operating Amb. Temp and Hum. -25°C~70°C, 20%~90% RH Non-Condensing
Storage Temp. and Hum. -40°C~85°C: 10%-95% RH Non-Condensing
Safety Standards UL60950-1; EN60950-1: 2006
Withstand Voltage Primary-Secondary: 3.0KVAC; less than or equal to 10mA.
Primary-PG: 1.5KVAC; less than or equal to 10mA.
Secondary-PG: 0.5KVDC; less than or equal to 10mA
Isolation Resistance greater than or equal to 100M ohms
EMI Conduction and Radiation Compliance to EN55022(CISPR22) Class B
Harmonic Current Compliance to EN61000-3-2, -3
EMS Immunity Compliance to EN6100-4-2, 3, 4, 5, 6, 8, 11;
ENV50204, light industry level, criteria A
General Charaterisitcs
MTBF (MIL-HDBK-217F) More than 200,000 Hrs (25°C, Full load)
Dimensions (LxWxH) 101.6 x 63.5 x 33 mm
Packing 60 PCS/CTN. G.W: 15.08kgs
Cooling Method Cooling by free air convection