Connex-Electronics.com
Qualtek Products
Enclosed Frame Switching Power Supplies - QPD-100 (100 Watts - Single Output)

Enclosed Frame Switching Power Supplies - QPD-100 (100 Watts - Single Output)
   
Features:
  • Universal AC input/ Full range
  • Wide Operating Ambient Temperature (-20°C~70°C)
  • High Efficiency, and High Reliability
  • Output Protections: OLP/OVP/SCP
  • All using 105°C long life electrolytic capacitors.
  • 100% full load burn-in test
Qualtek QPD-100
 
Approvals
 
Click here for specification and dimensions in .pdf formatPDF
Part Number Add part number QPD-100-5 to your Quote. QPD-100-5 Add part number QPD-100-12 to your Quote. QPD-100-12 Add part number QPD-100-15 to your Quote. QPD-100-15 Add part number QPD-100-24 to your Quote. QPD-100-24 Add part number QPD-100-48 to your Quote. QPD-100-48
Output Charateristics
DC Output 5V 12V 15V 24V 48V
Rated Current 16A 8.5A 7A 4.5A 2.3A
Current Range 0~16A 0~8.5A 0~7A 0~4.5A 0~2.3A
Ripple and Noise 0~70°C <80mV <100mV <100mV <120mV <200mV
-20~0°C <100mV <120mV <120mV <120mV <200mV
Voltage Adj. Range 4.7V-5.6V 11.0V-13.0V 13.7V-16.3V 22.4V-27.3V 44.4V-52.2V
Voltage Accuracy ±2% ±1% ±1% ±1% ±1%
Line Regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
Load Regulation ±1% ±1% ±1% ±1% ±1%
Set-up Time <2.0s (115VAC input, full load); <1.0s (230VAC input, full load)
Hold-up Time >10ms (115VAC input, full load); >20ms (230VAC input, full load)
Temperature Coefficient ±0.03% / °C
Overshoot and Undershoot <5.0%
Input Characteristics
Voltage Range 90VAC~264VAC, 127-370VDC
Frequency Range 47Hz-63Hz
Efficiency (Typical) 115VAC Input 80% 80% 83% 85% 83%
230VAC Input 80% 81% 84% 85% 84%
AC Current (max) <2.5A
Inrush Current (Typical) 20A@115VAC Cold start; 40 A@230VAC Cold Start
Leakage Current <0.4mA@115VAC; <0.75mA@230VAC
Protection
Over Load (OLP) 105%~150% of rated output current, hiccup mode, auto recovery
Over Voltage (OVP) 105%~150% of rated output voltage, shut down, re-power on to recover
Short Circuit (SCP) Long-term mode, auto recovery
Environmental Characteristics
Operating Amb. Temp and Hum. -25°C~70°C, 20%~90% RH Non-Condensing
Storage Temp. and Hum. -40°C~85°C: 10%-95% RH Non-Condensing
Safety Standards UL60950-1; EN60950-1: 2006
Withstand Voltage Primary-Secondary: 3.0KVAC; <=10mA.
Primary-PG: 1.5KVAC;<=10mA.
Secondary-PG: 0.5KVDC;<=10mA
Isolation Resistance >= 100M ohms
EMI Conduction and Radiation Compliance to EN55022(CISPR22) Class B
Harmonic Current Compliance to EN61000-3-2, -3
EMS Immunity Compliance to EN6100-4-2, 3, 4, 5, 6, 8, 11;
ENV50204, light industry level, criteria A
General Charaterisitcs
MTBF (MIL-HDBK-217F) More than 200,000 Hrs (25°C, Full load)
Dimensions (LxWxH) 160 x 98 x 38 mm
Packing 20 PCS/CTN. G.W: 13.6kgs
Cooling Method Cooling by free air convection