| Easy, Time Saving Installation |
| Simply push the cable through the installed strain
relief fitting and tighten dome flex nut for a liquid tight connection. The
integral O-Ring seal between body and housing eliminates the need for extra
seals. No disassembly of the fitting is required: Insert Cable - Tighten Nut -
Finished! |
 |
| Applications |
| Wherever a metal strain relief fitting is used, this
strain relief fitting will give you a greatly increased cable range with
superior corrosion protection. Typical applications are: Control cabinets,
marine, car washes, hot tubs, instrumentation, carpet cleaning machines, food
processing equipment, underground for direct burial or submersed up to 300 ft.
(150 PSIG). |
|
| Rugged - Attractive |
| The nickel plated brass Strain Relief Fitting gives
superior protection against corrosion and enhances the appearance of your
product. |
|
| Non-Corrosive |
| The Strain Relief Fitting is resistant to salt water,
weak acids, weak alkalis, alcohol, esters, ketones, ether, gasoline, mineral
oil, animal oil, vegetable oil and many other substances. |
|
| Large Range |
| 4000 types and sizes accommodate diameters from
1/16” to 1-3/4”. The flexible spline design results in the largest
cable range per size available. |
|
| Liquid Tight |
| Exceeds NEMA 4x and 6 specifications (UL tested). The
O-Ring between body and housing assures a reliable seal. It is particularly
suitable for submersed application. Up to 150 PSIG external pressure. |
| |
| Pull-out Resistance &
Protection - (See Breakout A) |
| Flexible, overlapping clamping splines prevent the form
seal from being pulled out of the fitting and offers protection for the
cable. |
|
| Submersible -
(See Breakout B) |
| The patented internal sealing edge results in a
superior seal between the splined Nylon clamping insert and nickel plated brass
body. |
|
| Unique -
(See Breakout C) |
| The patented recess and high performance seal
guarantees NEMA 4x and 6 (IP 68) at 150 PSIG (10 BAR). |
|
| Easy Installation -
(See Breakout D) |
| The anti-rotation grooves prevent cable rotation while
tightening the nut. |
|
| Snap Elbow |
Flex Nut |
 |
The Hinged Elbow saves space
and installation time. Feed cable through unfolded Elbow fold 90° and
secure with two screws. Position cable before tightening the Dome Nut for a
liquid tight connection. Quick & Easy! |
|
 |
The Dome Nut can be
substituted with a Flex Nut. The stainless steel spring extension offers
superior protection against kinking and chafing of the cable. |
|
|
|
| Approvals / Material |
 |
