Connex-Electronics.com
NTE Electronics
Toggle Switches - Bat Handle - Single Pole (Slow Make/Break)
   
Switches Main Page
Toggle Switches
Bat Handle - Single Pole (Slow Make/Break)
Bat Handle - Single Pole (Quick Make/Break)
Bat Handle - Single Pole - General Purpose
Bat Handle - Double Pole
Bat Handle - Single and Double Pole
Bat Handle - Single & Double Pole (Slow Make/Break)
Bat Handle - Mini Toggle
Bat Handle - Subminiature
Nylon Paddle - Single and Double Pole
Bat/Duck - Illuminated - ON/OFF - Single Pole
Rocker Switches
Miniature - Snap-In
Miniature - Illuminated - Snap-In
Round Hole - Snap-In
Rectangle - Snap-In
Sealed Automotive / Marine - Snap-In
Pushbutton Switches
Pushbutton - Single Pole
Snap Action Switches
Subminiature
Standard
Switch Hardware
Hardware Selection
Toggle Switches - Bat Handle - Single Pole (Slow Make/Break)
 
Bat Handle Toggle - Single Pole Specifications:
Current Rating: 15A 125VAC, 10A 250VAC, 3/4 HP 125-250VAC
Insulation Resistance: 100 Megohms (min.)
Dielectric Strength: 1000V RMS (min.)
Temperature Rating: 0°F to +150°F (-17.8°C to +65.6°C
Electrical Life: 50,000 cycles maintained, 25,000 cycles momentary
Mechanical Life: 100,000 cycles
Terminal Type: Refer to Diag. No. in Table
Mounting Hole: .500 (12.7)
UL and CSA
   
Features:
  • Neoprene Seal Toggle (54-456 & 54-457 ONLY)
  • Slow Make, Slow Break Contacts
  • AC Rated, Suitable for Low Voltage DC Also
  • Standard .500" Dia. Mounting Hole
  • Various Terminal Selections
S1 Dimensions
NTE P/N Circuitry Action Actuator Diag. No.
Add part number 54-001 to your Quote. 54-001 SPST ON NONE (OFF) Brass/Nickel Plate S1c
Add part number 54-002 to your Quote. 54-002 SPDT (ON) OFF (ON) Brass/Nickel Plate S1c
Add part number 54-006 to your Quote. 54-006 SPST ON NONE OFF Brass/Nickel Plate S1a
Add part number 54-007 to your Quote. 54-007 SPST ON NONE OFF Brass/Nickel Plate S1b
Add part number 54-008 to your Quote. 54-008 SPST ON NONE OFF Brass/Nickel Plate S1c
Add part number 54-009 to your Quote. 54-009 SPDT ON OFF ON Brass/Nickel Plate S1b
Add part number 54-010 to your Quote. 54-010 SPDT ON OFF ON Brass/Nickel Plate S1c
Add part number 54-023 to your Quote. 54-023 SPST ON NONE OFF Brass/Nickel Plate S1d
Add part number 54-024 to your Quote. 54-024 SPDT ON NONE ON Brass/Nickel Plate S1d
Add part number 54-025 to your Quote. 54-025 SPDT ON OFF ON Brass/Nickel Plate S1d
Add part number 54-456 to your Quote. 54-456 SPST ON NONE OFF Brass/Nickel Plate S1c
Add part number 54-457 to your Quote. 54-457 SPST (ON) NONE OFF Brass/Nickel Plate S1c


Note:()=MomentaryFunction
 
Bat Handle Toggle Switch Specifications:
Current Rating: 6A 125VAC, 3A 250VAC, 1/4 HP 120-240VAC
Insulation Resistance: 100 Megohms (min.)
Dielectric Strength: 1000V RMS (min.)
Temperature Rating: 0°F to +150°F (-17.8°C to +65.6°C
Electrical Life: 50,000 cycles
Mechanical Life: 100,000 cycles
Terminal Type: Screw Type
Mounting Hole: .500 (12.7)
UL and CSA
   
Features:
  • Slow Make, Slow Break Contacts
  • AC Rated, Suitable for Low Voltage DC Also
  • Standard .500" Dia. Mounting Hole
  • Screw Mount Terminals
S1 Dimensions
NTE P/N Circuitry Action Actuator Diag. No.
Add part number 54-094 to your Quote. 54-094 SPST (ON) NONE OFF Brass/Nickel Plate S1c
Add part number 54-096 to your Quote. 54-096 SPDT ON NONE ON Brass/Nickel Plate S1c
Add part number 54-097 to your Quote. 54-097 SPDT ON NONE (ON) Brass/Nickel Plate S1c
Add part number 54-143 to your Quote. 54-143 SPST (ON) NONE OFF Brass/Nickel Plate S1c


Note:()=MomentaryFunction