| DK6 / I-I, Combi-foot, TS 35/32 |
Representative Photo |
|
| Technical Information |
|
|
|
| Rail Type |
Combi Foot
|
| Input Signal Type |
Current
|
| Input Signal Range |
4...20 mA
|
| Module Type |
Terminal Block
|
| Power Requirements |
External
|
| Coupling Method |
Opto Isolated
|
| Output Signal Type |
Current
|
| Output Signal Range |
4...20 mA
|
| Housing Type |
Terminal block
|
Additional Data |
|
|
|
| Input Impedence |
50 ohms
|
| Input Maximum |
24 mA DC
|
| Zero Setting (4.0 mA) Adjustment |
±5%
|
| Span Adjustment (20 mA) |
±5%
|
| Output Load/Loop Resistance |
£500 ohms
|
| Output Supply Voltage (Min./Max.) |
18...30 VDC
|
| Accuracy Input/Output |
0.1 % of FS
|
| Transmission Frequency |
5 ms typical
|
| Dielectric Isolation Input to Output |
2 kV
|
| Dielectric Isolation I/O to Power Supply |
2 kV
|
| Storage Temperature Range |
-20°C...+85°C
|
| Operating Temperature Range |
0°C...+50°C
|
| Wire Size |
#20...12 AWG
0.5...2.5 mm²
|
| Clamp Screw Tightening Torque Nm (lb.in.) |
0.5 (4.38)
|
| Mechanical Dimensions (WxLxH) mm (in.) |
8/89/68 (.31"/3.5"/2.68")
|
| Insulation Stripping Length mm (in.) |
9 (.35")
|
| Certifications |
CE, CSA
|
Suggested Accessories |
|
|
|
| DIN-rail |
| End bracket |
| End plate/partition (AP/TW) |
| Ferrules |
| Markers (SchT) |
| Marking pens |
| Marking tags (DEK) |
| Mounting brackets |
| QB jumpers |
| Tools |
9908800000 