|
| Back to NK
Technologies Main Selection Page |
| AC and DC Current Switches |
| AS1 Series, Single-Range AC Current Switch |
| AS1 DODC
Series, Current Switch with Dual Output |
| AS3 Series, Multi-Range AC Current Operated Switches |
| ASM Series,
Self-Calibrating AC Current Switches |
| ASX Series, AC Current Switches with Time Delay |
| ASXP Series,
Powered AC Current Switches with Time Delay |
| AS0 Series, Low Range AC Current Operated Switches |
|
DS3 Series, DC
Current Operated Switches |
| AC and DC Current
Transducers |
| AT Series, AC Current Transducers, Average Responding |
| ATR Series, AC
Current Transducers, True RMS |
| AT/ATR 3 & 4 Series, High Current AC Transducers |
| ATP Series, Powered
AC Current Transducers |
| ATP/ATPR 3 & 4 Series, Powered AC Current Transducers, True
RMS |
| DT Series, DC Current
Transducers |
| Ground Fault / Earth Leakage
Sensors |
| AG Series, Ground Fault/Earth Leakage Sensors - Solid-State
Relay Output |
| AG Series, Ground
Fault/Earth Leakage Sensors - Mechanical Relay Output |
| AGL Series, Large Aperture Ground Fault
Sensors |
|
| ATP Series, Powered AC Current Transducers |
| |
| ATP Series Powered Current Transducers sense currents from 0–200A and provide a proportional analog VDC or mA output. Powered by 120VAC or 24VAC/VDC, the ATP Series eliminates the need for costly power supplies or voltage rectifiers inside the control panel. Designed for motor control applications with standard sinusoidal waveforms, the ATP features user-selectable input ranges, a choice of outputs and split-core or solidcore enclosures. |
 |
Download Complete Specifications in .pdf Format |
Commercial and Industrial Motor Control Centers
- 120VAC power supply option allows for
powering off of readily available supplies; ideal for pumping,
water/wastewater, boiler and other industrial applications.
- Eliminates the need for 24VDC power supply
or AC rectifiers within the control panel; saves space, material and labor
associated with power supplies.
|
|
- Fast, Accurate RMS Measurement - Unique
‘average responding’ algorithm provides RMS output on pure sine wave
and constant speed loads, offering improved accuracy over two-piece
solutions.
- Jumper Selectable Input Ranges - Each unit
has multiple input range capability and can be used for a variety of
applications, reducing the need for separate models.
- Isolation Output -Output is magnetically
isolated from the input for enhanced safety and elimination of insertion
losses.
|
|
| |
|
| |
-005 Model |
-010 Model |
-420 Model |
| Output Signal |
0–5VDC |
0–10VDC |
4–20mA |
| Output Limit |
112% (5.6V) |
112% (11.2V) |
112% (22.4mA) |
| Loading |
- 25KOhms min.: VDC Models
- 500Ohms max.: 4–20mA Models
|
| Response Time |
100ms (10–90% step change) |
| Frequency Range |
40–100 Hz standard. Special calibration for frequencies 100–400Hz, consult factory. |
| Accuracy |
- Solid-core: <0.5%
- Split-core: 1%
|
| Power Supply |
120VAC or 24VAC/VDC, 2VA max |
| Isolation Voltage |
UL listed to 1,270VAC (tested to 5KV) |
| Input Ranges |
0–200A Jumper-selectable |
| Sensing Aperture |
- -FF Case: 0.55” (14mm) dia.
- -SP Case: 0.85” (21.6mm) sq.
|
| Case |
UL94 V0 Flammability Rated |
| Environmental |
5 to 122oF (-15 to 50oC) 0–95% RH, non-condensing |
. |
|
| |
|
| Ordering Information |
Download Complete Specifications in .pdf Format |
| Solid-Core Models |
| Model |
Description |
Output |
 ATP0-420-120-FF |
0–2 & 0–5A Ranges, Front Term. |
4–20mA |
|
ATP0-010-120-FF |
0–2 & 0–5A Ranges, Front Term. |
0–10VDC |
|
ATP0-420-24U-FF |
0–2 & 0–5A Ranges, Front Term. |
4–20mA |
|
ATP0-010-24U-FF |
0–2 & 0–5A Ranges, Front Term. |
0–10VDC |
|
ATP1-420-120-FF |
0–10, 0–20, 0–50A Ranges, Front Term. |
4–20mA |
|
ATP1-010-120-FF |
0–10, 0–20, 0–50A Ranges, Front Term. |
0–10VDC |
|
ATP1-420-24U-FF |
0–10, 0–20, 0–50A Ranges, Front Term. |
4–20mA |
|
ATP1-010-24U-FF |
0–10, 0–20, 0–50A Ranges, Front Term. |
0–10VDC |
|
ATP2-010-120-FF |
0–100, 0–150, 0–200A Ranges, Front Term. |
0–10VDC |
|
ATP2-420-24U-FF |
0–100, 0–150, 0–200A Ranges, Front Term. |
4–20mA |
|
ATP2-010-24U-FF |
0–100, 0–150, 0–200A Ranges, Front Term. |
0–10VDC |
|
ATP2-420-120-FF |
0–100, 0–150, 0–200A Ranges, Front Term. |
4–20mA |
| Split-Core Models |
| Model |
Description |
Output |
|
ATP0-420-120-SP |
0–2 & 0–5A Ranges |
4–20mA |
|
ATP0-010-120-SP |
0–2 & 0–5A Ranges |
4–20mA |
|
ATP0-420-24U-SP |
0–2 & 0–5A Ranges |
4–20mA |
|
ATP0-010-24U-SP |
0–2 & 0–5A Ranges |
0–10VDC |
|
ATP1-420-120-SP |
0–10, 0–20, 0–50A Ranges |
4–20mA |
|
ATP1-010-120-SP |
0–10, 0–20, 0–50A Ranges |
4–20mA |
|
ATP1-420-24U-SP |
0–10, 0–20, 0–50A Ranges |
4–20mA |
|
ATP1-010-24U-SP |
0–10, 0–20, 0–50A Ranges |
0–10VDC |
|
ATP2-420-120-SP |
0–100, 0–150, 0–200A Ranges |
4–20mA |
|
ATP2-010-120-SP |
0–100, 0–150, 0–200A Ranges |
4–20mA |
|
ATP2-420-24U-SP |
0–100, 0–150, 0–200A Ranges |
4–20mA |
|
ATP2-010-24U-SP |
0–100, 0–150, 0–200A Ranges |
0–10VDC |
|
|
