| SAI-6-M 3P IDC UT |
Representative Photo |
|
|
| Technical Information |
|
|
|
| Application/Enclosure Requirements |
General Industrial Environment (Sensor distributors & Access.)
|
| Bus Active System or Passive Application |
Passive
|
| No. of Contact Pins |
3
|
| Application Suggestion |
Choice: Base unit only for Bus Active Hood or Passive Hood prewired up to 10M
|
| Homerun Cable Connection Method |
UT Base Only, Hood Separate
|
| Cable Gland Diameter |
Does not apply
|
| Cable Length |
Does not apply
|
| No. of contact sockets |
6
|
| Connector diameter |
IDC 12 mm
|
Additional Data |
|
|
|
| Enclosure Material
|
Pocan
|
| Max. voltage |
30 V
|
| Protection Class |
IP 67/NEMA 6
|
| Height |
19 mm (0.75 inches)
|
| Width |
60 mm (2.36 inches)
|
| Length |
127 mm (5 inches)
|
| Current per signal |
2 A
|
| Total Current-Single Supply |
7 A
|
| Total Current-Dual Supply |
12 A
|
| min. voltage |
10 Veff
|
| Rated Voltage |
32 Veff
|
| Test voltage |
1 kVeff
|
| Degree of soiling |
3
|
| Insulation Resistance |
> 10^9 MOhm
|
| Plugging cycles |
<= 50
|
| Contact carrier material |
Pocan
|
| Hood sealing material |
|
| Flammability Class |
V0
|
| LED color for operation function |
green
|
| LED color for I/O function |
yellow
|
| Electrical isolation via jumpering available |
yes
|
| Bus line connection via |
-
|
| Operation temperature, min. |
-20 �C
|
| Operation temperature, max. |
90 �C
|
| Storage temperature, min. |
-20 �C
|
| Storage temperatur, max. |
90 �C
|
| Contact gap, valve plug |
0 mm
|
| Comments: |
Stock Base unit for multiple applications
|
Suggested Accessories |
|
|
