 |
|
| Weco Series 961 and 961-DS | |
Types 961 and 961-DS0.2 in. spacing 2 to 32 poles |
|
Technical Data
Center to
Center Spacing: 5.08 mm / .200 in.
Nominal Cross Section: 2.5 mm2 / 3874
mils2
Wire Stripping Length: 5.5 mm / .22 in.
Recommended Hole Diameter in PC Board:
1.3 mm / .05 in.
Approval Information
UL File No.
E69841
CSA File No. LR24322
961
| Rating | Current (A) | Voltage (V) | AWG |
|---|---|---|---|
| UL | 20 | 300 | 26-12* |
| CSA | 15 | 300 | 22-10 |
961-DS
| Rating | Current (A) | Voltage (V) | AWG |
|---|---|---|---|
| UL | 20 | 300 | 26-12* |
| CSA | 15 | 300 | 22-10 |
* 24-26 AWG range
for factory wiring only.
Breakdown Voltage: 2500 V.
Material
Molding: Polyamide, self extinguishing to UL
94, V-0, color grey
Terminal Body: tin plated brass
Wire Protector: tin plated copper alloy
Screw: M3, zinc plated steel, yellow chromated
Screw Tightening Torque: max: 0.5 Nm / 4.5 lb-in.
Solder Pin: diameter 1.0 mm / 0.04 in. tin plated brass
Options
| Mark in Order Box | Description |
|---|---|
| CN: | Consecutive Numbering (hot stamped white numbers) |
| SM: | Special Marking (please provide sketch) |
| BS: | Brass Screws |
| PS: | Passivated Steel Screws |
| WG: | Wire guide (see "accessories") |
| G05: | Gold Plating (5 micro inches) |
| G30: | Gold Plating (30 micro inches) |
| S30: | Silver Plating (30 micro inches) |
Note: If more than one option is required,
please separate each option with a dash (-).
|
| Ordering Information |