 |
|
| Weco Series 930 and 930-DS | |
Types 930 and 930-DS3.5 mm spacing 2 to 24 poles |
|
Technical Data
Center to
Center Spacing: 3.5 mm / .138 in.
Nominal Cross Section: 1 mm2 / 1550
mils2
Wire Stripping Length: 6 mm / .24 in.
Recommended Hole Diameter in PC Board:
1.2 mm / 0.05 in.
Approval Information
UL File No.
E69841
CSA File No. LR24322
930
| Rating | Current (A) | Voltage (V) | AWG |
|---|---|---|---|
| UL | 7 | 300 | 26-16 |
| CSA | 7 | 300 | 26-16 |
930-DS
| Rating | Current (A) | Voltage (V) | AWG |
|---|---|---|---|
| UL | 7 | 300 | 26-16 |
| CSA | 7 | 300 | 26-16 |
Breakdown Voltage: 2500 V
Material
Molding: Polyamide, self extinguishing to UL
94,
V-O, color grey
Temperature limits:
Short time: 140°C / 284°F
Continuous: 80°C / 176°F
Low limit: -40°C / -40°F
Comparative Tracking Index: CTI > 600
Oxygen Index Rating: 33%
Terminal Body: tin plated brass
Wire Protector: nickel silver
Screw: M2, zinc plated steel, yellow chromated
Screw Tightening Torque: max: 0.2 Nm / 2 lb-in.
Solder Pin: diameter 0.9 mm / 0.035 in.
tin plated brass
Options
| Mark in Order Box | Description |
|---|---|
| CN: | Consecutive Numbering (hot stamped white numbers) |
| SM: | Special Marking (please provide sketch) |
| G05: | Gold Plating (5 micro inches) |
| G30: | Gold Plating (30 micro inches) |
| S30: | Silver Plating (30 micro inches) |
Note: If more than one option is required,
please separate each option with a dash (-).
|
| Ordering Information |