Weco Series 120-A-111, 120-M-111, 120-M-211 PCB Depluggable Terminal Blocks


Weco Series 120-A-111, 120-M-111, 120-M-211

Type 120-A-111

5 mm spacing 2 to 24 poles

Type 120-M-111 and 120-M-211

5 mm spacing 2 to 24 poles

Technical Data

Center to Center Spacing: 5 mm / .197 in.
Nominal Cross Section: 1.5 mm 2 / 2325 mils 2
Wire Stripping Length: 7 mm / .28 in.
Recommended Hole Diameter in PC Board:
1.4 mm / .06 in.

Approval Information

UL File No. E69841
CSA File No. LR24322

Rating	Current (A)	Voltage (V)	AWG
UL	10	300	26-12*
CSA	10	300	26-12

* 24-26 AWG range for factory wiring only

Material

Molding: Polyamide, self extinguishing to UL 94,
V-O, color grey
Temperature limits:
Short time: 140°C / 284°F
Continuous: 80°C / 176°F
Low limit: -40°C / -40°F
Comparative Tracking Index: CTI > 600
Oxygen Index Rating: 33%
Terminal Body: nickel plated brass
Contact Spring / Wire Protector:
tin plated copper alloy
Screw: M3, zinc plated steel, yellow chromated
Screw Tightening Torque: max: 0.5 Nm / 4.5 lb-in.
Solder Pin: 1 x 1 mm / .04 x .04 in.
tin plated brass

Options

Please mark in “How to Order” box.

Mark in Order Box	Description
CN:	Consecutive Numbering (white, hot stamped numbers)
SM:	Special Marking (please provide sketch)
BS:	Brass Screws
PS:	Passivated Steel Screws
G05:	Gold Plating (5 micro inches)
G30:	Gold Plating (30 micro inches)
S30:	Silver Plating (30 micro inches)
18MM:	Solder pin length of 18mm
Note: If more than one option is required, please separate each option with a dash (-).

Ordering Information