|
|
 |
| Power-Sonic Model PS-6200 Sealed Lead-Acid Battery
|
Order Part Number:
PS-6200
| General
Specifications |
| Dimensions: |
| Length |
6.18 inches |
157 millimeters |
| Width |
3.27 inches |
83 millimeters |
| Height |
4.92 inches |
125 millimeters |
| Height over Terminals |
4.92 inches |
125 millimeters |
| Approximate Weight |
8.20 pounds |
3.70 kilograms |
| Terminals: |
Nut and bolt connector
|
| Case: |
ABS Plastic |
| Electrical
Specifications |
| Nominal Voltage: |
6 Volts (3 cell in series)
|
| Nominal Capacity:
|
| 20 hour rate |
(1000mA to 5.25 volts) |
20.0 AH |
| 10 hour rate |
(1800mA to 5.25 volts) |
18.0 AH |
| 5 hour rate |
(3300mA to 5.10 volts) |
16.5 AH |
| 1 hour rate |
(12300mA to 4.50 volts) |
12.3 AH |
| Energy Density (20 hour rate)
|
1.21 Watt-hours/cubic inch |
73.7 Watt-hours/l |
| Specific Energy (20 hour rate)
|
14.7 Watt-hours/pound |
32.4 Watt-hours/kg |
| Internal Resistance (Fully Charged
Battery) |
12 milliohms (approx.)
|
| |
Charging :
Cycle Applications: Limit initial current to 4000mA. Charge until battery
voltage (under charge) reaches 7.20 to 7.35 volts at 68º F (20º C).
Hold at 7.20 to 7.35 volts until current drops to approximately 200mA. Battery
is fully charged under these conditions, and charger should either be
disconnected or switched to "float" voltage. "Float" or "Stand-by Service":
Hold battery across constant voltage source of 6.75 to 6.90 volts continuously.
When held at this voltage, the battery will seek its own current level and
maintain itself in a fully charged condition.
|
