|
|
 |
| Power-Sonic Model PS-12330 Sealed Lead-Acid Battery
|
Order Part Number:
PS-12330
| General
Specifications |
| Dimensions: |
| Length |
7.70 inches |
196 millimeters |
| Width |
5.19 inches |
132 millimeters |
| Height |
6.10 inches |
155 millimeters |
| Height over Terminals |
7.0 inches |
178 millimeters |
| Approximate Weight |
26.50 pounds |
12.00 kilograms |
| Terminals: |
NB, U, AP, M, B |
| Case: |
Polypropylene |
| Electrical
Specifications |
| Nominal Voltage: |
12 Volts (6 cell in series)
|
| Nominal Capacity:
|
| 20 hour rate |
(1650mA to 10.50 volts) |
33.0 AH |
| 10 hour rate |
(3000mA to 10.50 volts) |
30.0 AH |
| 5 hour rate |
(5000mA to 10.20 volts) |
25.0 AH |
| 1 hour rate |
(19.8A to 9.00 volts) |
19.8 AH |
| Energy Density (20 hour rate)
|
1.62 Watt-hours/cubic inch |
99.0 Watt-hours/l |
| Specific Energy (20 hour rate)
|
14.9 Watt-hours/pound |
33.0 Watt-hours/kg |
| Internal Resistance (Fully Charged
Battery) |
10 milliohms (approx.)
|
| |
Charging :
Cycle Applications: Limit initial current to 6600mA. Charge until battery
voltage (under charge) reaches 14.40 to 14.70 volts at 68º F (20º C).
Hold at 14.40 to 14.70 volts until current drops to approximately 330mA.
Battery is fully charged under these conditions, and charger should either be
disconnected or switched to "float" voltage. "Float" or "Stand-by Service":
Hold battery across constant voltage source of 13.50 to 13.80 volts
continuously. When held at this voltage, the battery will seek its own current
level and maintain itself in a fully charged condition.
|
