connex-electronics.com
Weidmuller Products

---

Back to Weidmuller Main Selection Page    Weidmuller Power Supplies Main Selection Page Introduction - Power Delivery Solutions General Purpose Power Supplies Single Phase Input Info & Selection Chart 24-28VDC Output / 3A 24-28VDC Output / 5A 24-28VDC Output / 10A 24-28VDC Output / 20A Three Phase Input 24-28VDC Output / 10A 24-28VDC Output / 20A 24-28VDC Output / 40A Advanced Features Power Supplies Single Phase Input Info & Selection Chart 5VDC Output / 2A 5VDC Output / 3A 5VDC Output / 8A 12VDC Output / 1.5A 12-15VDC Output / 3A 12VDC Output / 10A 24VDC Output / 0.5A 24VDC Output / 1A 24-28VDC Output / 2.3A 24-28VDC Output / 6.5A 22-28VDC Output / 10.7-13.6A 48VDC Output / 1.04A 48VDC Output / 3.25A Three Phase Input 24VDC Output / 2.3A 24-28VDC Output / 6.5A 23-28VDC Output / 12.5A 23-28VDC Output / 25A 23-28VDC Output / 40A Pro-M Series Power Supplies Pro-M Series Introduction Single Phase Input 24VDC Output / 3A 24VDC Output / 5A 24VDC Output / 7.5A 24VDC Output / 10A 24VDC Output / 20A 24VDC Output / 40A Three Phase Input 24VDC Output / 5A 24VDC Output / 10A 24VDC Output / 20A 24VDC Output / 40A T-Series High Performance Industrial Power Supplies with Hazardous Approvals T-Series Introduction Single Phase Input 12VDC Output / 6A 12VDC Output / 12A 24VDC Output / 3.8A 24VDC Output / 7.5A 24VDC Output / 15A 24VDC Output / 25A 48VDC Output / 4A 48VDC Output / 7.5A 48VDC Output / 12.5A T-Series Redundancy Modules Redundancy Modules DC-DC Converters Introduction - DC-DC Converters 12VDC Input DC-DC Converters 24VDC Input DC-DC Converters Diode Modules Diode Modules for Redundancy Battery Back Up Units (BBUs) Introduction - Battery Back Up Units (BBUs) Battery Back Up Units (BBUs) Electronic Fusing System WAVEGUARD Introduction - Electronic Fusing System WAVEGUARD Electronic Fusing Modules		Power Supplies Part Number:  7924740324 CP-SNT 300W 24VDC 12.5A Representative Photo Technical Information Power Supply Type   Switchmode Input Voltage   380…480 VAC Output Voltage   24 VDC Output Current Rating   12.5A @ 24V 10.7A @ 28V Housing Type   CP Additional Data Rail Type   35 mm DIN-rail / Chassis Input Voltage, Minimum   342 VAC Input Voltage, Typical   380-480 VAC ±10% 3 Phase Input Voltage, Maximum   528 VAC Frequency   50/60 Hz Overvoltage Protection   Varistor Switching Frequency   100 kHz Efficiency (at Maximum Load)   80% Maximum Ripple   Status Indicator   Green LED (DC on) Maximum Capacitive Load   5,000 µF Load Share   Parallel operation for increased current or redundance Load (10-100% Load)   5% Storage Temperature Range   -40°C...+85°C Operating Temperature Range   -0°C...+50°C Wire Size   #22...12 AWG 0.5…4.0 mm² Mechanical Dimensions (LxWxH) mm (in.)   170/160/82 (6.7/6.3/3.2) Fault Relay   Form C contacts (1A max @ 30 VDC or 125 VAC; 10mA min @ 5 VDC Certifications   cULus 508 Listed, CE Accessories   Chassis Mount Kit  7920560000 (Order 2 mounting kits per power supply)

connex homepage   main products page   manufacturer linecard   email connex

Connex Electronics Corporation   Toll Free 1-800-972-5932

Copyright © 1999, 2010 Connex Electronics Inc. All rights reserved. This file last modified 11 23 15 Thursday March 04, 2010