| |
Types 970 and 970-DS
5
mm spacing 2 to 32 poles
|
| |
|
Technical
Data
Center to
Center Spacing: 5 mm / .197 in.
Nominal Cross Section: 2.5 mm2 / 3874
mils2
Wire Stripping Length: 6 mm / .24 in.
Recommended Hole Diameter in PC Board:
1.3 mm / .05 in.
Approval
Information
UL File No.
E69841
CSA File No. LR24322
970
| Rating |
Current (A) |
Voltage (V) |
AWG |
| UL |
20 |
300 |
26-12* |
| CSA |
15 |
300 |
22-10 |
970-DS
| Rating |
Current (A) |
Voltage (V) |
AWG |
| UL |
20 |
300 |
26-12* |
| CSA |
15 |
300 |
26-10 |
* 24-26 AWG range
for factory wiring only.
Breakdown Voltage: 2500 V.
Material
Molding: Polyamide, self extinguishing to UL
94, V-0, color grey
Terminal Body: tin plated brass
Wire Protector: tin plated copper alloy
Screw: M3, zinc plated steel, yellow chromated
Screw Tightening Torque: max: 0.5 Nm / 4.5 lb-in.
Solder Pin: diameter 1.0 mm / 0.04 in. tin plated copper
Options
| Mark in Order
Box |
Description |
| CN: |
Consecutive Numbering (hot
stamped white numbers) |
| SM: |
Special Marking (please provide
sketch) |
| BS: |
Brass Screws |
| PS: |
Passivated Steel Screws
|
| WG: |
Wire Guide (see
"accessories") |
| G05: |
Gold Plating (5 micro inches)
|
| G30: |
Gold Plating (30 micro inches)
|
| S30: |
Silver Plating (30 micro
inches) |
| XXMM: |
Longer solder pins up to 75 mm
/ 3 in. (please indicate length in millimeters) |
Note: If more than one option is required,
please separate each option with a dash (-)
