connex-electronics.com
Weco Series 302-G

Technical Data

Center to Center Spacing:
8 mm / .315 in.
Nominal Cross Section:
1.5 mm ² / 2325 mils ²
Wire Stripping Length: 6 mm / .24 in.
Recommended Hole Diameter in PC Board:
1.3 mm / .05 in.

Approval Information

UL File No. E69841 
CSA File No. LR24322 

302-G and 302-G-DS

* type 302-G-DS is CSA certified for 26-14 AWG

Breakdown Voltage: 5000 V.

Material

Molding: Polyamide, self extinguishing to UL 94, V-2, natural
Temperature Limits:
Short time: 140°C / 284°F
Continuous: 80°C / 176°F
Low limit: -40°C / -40°F
Comparative Tracking Index: CTI > 600
Oxygen Index Rating: 28%
Terminal Body: tin plated brass
Wire Protector: tin plated copper alloy
Screw: M2.6 both zinc plated steel, yellow chromated
Screw Tightening Torque:  max: 0.4 Nm / 3.5 lb-in.
Solder Pin: Diameter 1 mm / 0.04 in., tin plated copper

Options

Please mark in "How to Order" box.

CN:	Consecutive Numbering (hot stamped white numbers)
SM:	Special Marking (please provide sketch)
BS:	Brass Screws
PS:	Passivated Steel Screws
G05:	Gold Plating (5 micro inches)
G30:	Gold Plating (30 micro inches)
S30:	Silver Plating (30 micro inches)
XXMM:	Longer solder pins up to 75 mm / 3 in (please indicate length in millimeters)

Note: If more than one option is required, please separate each option with a dash (-)

Ordering Information