| Wago System
Modules |
 |
| Part
Number |
Conformity
Marking |
Approvals |
| 750-602 |
 |
cULus,
ABS*, BV*, DNV*,
GL*, LR*,
RINA*,
cULus-EX,
KEMA |
| *The 750-624 filter module is
absolutely necessary |
| SUPPLY MODULE PASSIVE CARRIER RAIL DIN 35
CAGE CLAMP CONNECTION |
| The supply module provides field side power
through the power jumper contacts. Maximum available supply current to all
connected modules is 10 A. Should higher currents be necessary, intermediate
supply modules must be added to the assembly. Supply modules may also be used
to change the supply voltage to certain I/O modules within the assembly - on
one fieldbus node. |
|
| Technical Information |
| Characteristic |
Value |
| Voltage supply via power jumper contacts
(max) |
DC 24 V |
| Current via power jumper contacts (max) |
DC 10 A |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
| EMC emission of interference |
per EN 50081-1 (93) |
| UL 508 |
E175199, UL 508 |
| EMC marine applications - noise proof |
gem. Germanischer Lloyd (1997) |
| UL 1604 |
E198726, UL 1604 Class 1 Dev2 ABCD T4A |
| EMC marine applications - noise
transmission |
gem. Germanischer Lloyd (1997) |
| Conformity marking |
CE |
|
| Characteristic |
Value |
| KEMA |
01ATEX1024X Eex nA II T4 |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Voltage CSA |
24 V |
| Current rating CSA |
10:00 AM |
| Weight |
44.5 g |
| Color |
light gray |
| Height |
64 mm |
| Height |
2.52 in |
| Width |
12 mm |
| Width |
0.472 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
