| Wago Fieldbus
Coupler |
 |
| Part
Number |
Conformity
Marking |
Approvals |
| 750-310 |
 |
cULus |
| CC-LINK 156 kBaud - 10 MBaud CARRIER RAIL
DIN 35 CAGE CLAMP CONNECTION |
This buscoupler allows connection of the
WAGO-I/O-SYSTEM as a slave to the CC-Link fieldbus. The buscoupler is capable
of supporting all I/O modules. The buscoupler automatically configures,
creating a local process image which may include analog, digital or specialty
modules. Analog and specialty module data is sent via words and/ or bytes,
digital data is sent bit by bit.
CC-Link allows the storing of the process
image in the corresponding Master control (PLC, PC or NC).
The local process
image is divided into two data zones containing the data received and the data
to be sent. The process data can be sent via the CC-Link fieldbus to the PLC,
PC or NC for further processing, and received from the field via
CC-Link.
The data of the analog modules is stored in the process image which
is created automatically according to the order in which the modules are
connected to the buscoupler. The bits of the digital modules are sent byte by
byte and added to the analog data. If the amount of digital information exceeds
8 bits, the buscoupler automatically starts with a new byte. |
|
| Technical Information |
| Characteristic |
Value |
| Max. no. of nodes |
64 |
| Transmission medium |
shielded Cu cable 2 / 3 x 0,5 mm² |
| Max. length of bus line |
100 m ... 1200 m (depends on the baud rate / on
the cable) |
| Baud rate |
156 kBaud ... 10 Mbaud |
| Buscoupler connection |
1 x D-SUB 9; socket |
| UL 508 |
E175199, UL 508 |
| Conformity marking |
CE |
| Max. no. of I/O modules |
6400% |
| Max. fieldbus input image |
14 Byte digital, 2 Byte System |
| Station addresses |
4/1 ... 4 |
| Max. fieldbus output image |
32 Byte analog |
| Voltage supply |
DC 24 V (-15% / + 20%) |
| Input current (max) |
500 mA |
| Efficiency of the power supply |
87% |
| Internal current consumption |
300 mA |
| Total current for the I/O modules |
1700 mA |
| Isolation |
500 V system / supply |
| Voltage via power jumper contacts (max) |
DC 24 V (-15% / + 20%) |
| Current via power jumper contacts (max) |
DC 10 A |
| Operating temperature |
0 °C ... + 55 °C |
|
| Characteristic |
Value |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
gem. EN 61000-6-2 (1999) |
| EMC emission of interference |
gem. EN 61000-6-4 (1997) |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Voltage CSA |
24 V |
| Weight |
210 g |
| Color |
light gray |
| Height |
65 mm |
| Height |
2.56 in |
| Width |
51 mm |
| Width |
2.008 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
