connex-electronics.com Wago
Wago IO System - Analog Output Modules
Wago Analog Output Modules
Wago 750-560
Part Number Conformity Marking
750-560 CE
2-CHANNEL ANALOG OUTPUT MODULE 0-10 V 10 MA CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION
The analog output module creates a standardized signal of 0-10V. The output signal is electrically isolated and will be transmitted with a resolution of 8 bits. Outputs are short-circuit-protected. Each channel is equipped with an LED to indicate short-circuits or overloads >= 15 mA. The shield (screen) is directly connected to the carrier rail. Both the internal system and field side supply are used to power the module. The output channels have one common ground potential. The analog outputs and the 24V supply have one common ground potential so that actuators such as servo drives can be connected using a 3-conductor cable.
Technical Information
Characteristic Value
No. of outputs 2
Current consumption max (internal) 16 mA
Signal voltage 0 - 10 V
Load impedance >= 1 kOhm
Resolution (Bit) 8 Bit
Measuring error (25°) < +/- 0.2 % of the full scale value
Temperature coefficient < +/- 0.02 % / K OF THE FULL SCALE VALUE
Conversion time (typ) 10 ms
Conformity marking CE
Voltage supply VIA SYSTEM VOLTAGE AC / DC 24 V
Isolation 500 V system / supply
Data size 2 x 16 Bit Data2 x 8 Bit control / status (optional)
Operating temperature 0 °C ... + 55 °C
Storage temperature -25 °C ... +85 °C
Relative air humidity 95%
Vibration resistance acc. IEC 60068-2-6
Shock resistance acc. IEC 60068-2-27
Characteristic Value
Degree of protection IP 20
EMC immunity to interference gem. EN 61000-6-2 (1999)
EMC emission of interference per EN 50081-1 (93)
Cross section from [mm²] 0.08 mm²
Cross section to [mm²] 2.5 mm²
Cross section from [AWG] 28 AWG
Cross section to [AWG] 14 AWG
Weight 53.5 g
Color light gray
Height 64 mm
Height 2.52 in
Width 12 mm
Width 0.472 in
Depth 100 mm
Depth 3.937 in
Strip length from 8 mm
Strip length to 9 mm
Strip length 0.33 in