connex-electronics.com Power-Sonic
Power-Sonic Model PS-610 Sealed Lead-Acid Battery
 
PS610
 

Order Part Number: Add This Part to your Quote. PS-610

General Specifications
Dimensions:
Length 2.01 inches 51 millimeters
Width 1.65 inches 42 millimeters
Height 2.01 inches 51 millimeters
Height over Terminals 2.20 inches 56 millimeters
Approximate Weight 0.60 pounds 0.30 kilograms
Terminals: Quick Disconnect Tabs (0.187"x0.032")
Case: ABS Plastic
Electrical Specifications
Nominal Voltage: 6 Volts (3 cell in series)
Nominal Capacity:
20 hour rate (50mA to 5.25 volts) 1.0 AH
10 hour rate (90mA to 5.25 volts) 0.9 AH
5 hour rate (160mA to 5.10 volts) 0.8 AH
1 hour rate (600mA to 4.50 volts) 0.6 AH
Energy Density (20 hour rate) 0.91 Watt-hours/cubic inch 54.9 Watt-hours/l
Specific Energy (20 hour rate) 9.5 Watt-hours/pound 20.7 Watt-hours/kg
Internal Resistance (Fully Charged Battery) 110 milliohms (approx.)
 
Charging :

Cycle Applications: Limit initial current to 200mA. Charge until battery voltage (under charge) reaches 7.20 to 7.35 volts at 68º F (20º C). Hold at 7.20 to 7.35 volts until current drops to approximately 10mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage.

"Float" or "Stand-by Service": Hold battery across constant voltage source of 6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.