| Basic specifications
|
| Optical power measurement |
W, dBm |
| Range setting |
Auto (Manual setting available) |
| Accuracy |
±0.7% (±5% in combination with the optional sensor)
|
| Wavelength sensitivity compensation
|
Can be set for every 1nm.
Automatic compensation for the sensor’s sensitivity
Max. 10 wavelengths preset (including initial value for a
sensor) |
| Scaling |
Can be set for each wavelength. |
| Relative measurement |
Display the relative value to the measured value or set value.
(Displayed value = Measured value – Reference value)
- Reference value can be set from the measured value or
manual input.
- Settable range: 0.001nW to 1.9999W (-90.00dBm to 33.00dBm)
|
| Display |
4-1/2 digit, (19999 max.), Display resolution: 0.01dBm / 0.01dB
|
| Measurement display unit |
nW, mW, mW, dBm, dB |
| Wavelength display |
4 digit, Unit: nm |
| Display update rate |
330ms approx. |
| MAX/MIN display |
Maximum and minimum value display while measurement
|
| Average display |
Display the moving average value.
Averaging times: 2 to 100 |
| Analog output |
1V approx. when the sensor calibration point input
|
| Output resistance |
50W |
| Output connector |
ø3.5 mini jack |
| Interface |
Output measurement value and remote control
|
| Auxiliary functions |
Auto power save, Setting backup, Battery check
|
| Safety |
EN61010-1: 2001 Pollution degree 2 |
| Power supply |
AA (LR6) × 4, AC adapter (9445-02
|
| Max. rated power |
1.6VA |
| Continuous battery operation
|
60 hours approx. (continuous use with the 9742 at calibration point input)
|
| Dimensions, mass |
85(W) × 160(H) × 35(D) mm, 270g (excluding batteries)
|
