connex-electronics.com
Hioki

Hioki Testing Equipment Clamp Testing Component Testing 3540 m-Ohm HiTESTER 3541 Resistance HiTESTER 3560 AC m-Ohm HiTESTER 9203 DIGITAL PRINTER 3550 BATTERY HiTESTER 3551 BATTERY HiTESTER 3555 BATTERY HiTESTER 3561 BATTERY HiTESTER 3554 BATTERY HiTESTER 3511-50 LCR HiTESTER 3522-50 LCR HiTESTER 3532-50 LCR HiTESTER 3535 LCR HiTESTER 3501 CAPACITANCE HiTESTER 3503 C HiTESTER 3504 C HiTESTER Multi Meter series Data Logger Series Environmental Measuring Field Measuring Instruments Multimeter Series Networking Testers Other Testing Equipment Power Meters Recorders Safety Testing Signal Generators Downloads Catalogues and Guides Software

Hioki Component Testing Instruments  3532-50 LCR HiTESTER Overview Impedance meter with a wide test frequency range Higher frequency range (42 Hz to 5 MHz) High speed measurement of 5 ms LCR meter Interactive touch panel operation Wide setting range for measurement voltage and current OPTION OPTION Options (Click for picture) This product cannot be used alone. Measurement requires optional test fixture or probe    9140 FOUR-TERMINAL PROBE - DC to 100 kHz, Measurement ranges are limited when using the  9140    9143 PINCHER PROBE - DC to 5 MHz, Measurement ranges are limited when using the  9143    9261 TEST FIXTURE - cable connection type, DC to 5 MHz    9262 TEST FIXTURE - direct connection type, DC to 5 MHz    9263 SMD TEST FIXTURE - direct connection type, DC to 5 MHz    9268 DC BIAS VOLTAGE UNIT - ± 40 V DC max    9269 DC BIAS CURRENT UNIT - ± 2 A DC max.    9165 CONNECTION CORD - for 9268/9269; BNC to BNC, 1.5 m (4.92 ft) length    9166 CONNECTION CORD - for 9268/9269; BNC to clip, 1.5 m (4.92 ft) length    9442 PRINTER 9443-02 AC ADAPTER - for EU, used with the  9442 PRINTER    9443-03 AC ADAPTER - for USA, used with the  9442 PRINTER  9446 CONNECTION CABLE - for connecting the  3532-50 to the  9442  1196 RECORDING PAPER - 25 m (82.03 ft), 10 rolls/1set  9518-01 GP-IB INTERFACE  9151-02 GP-IB CONNECTION CABLE - 2 m (6.56 ft) length  9151-04 GP-IB CONNECTION CABLE - 4 m (13.12 ft) length  9593-01 RS-232C INTERFACE LabView Driver - Control and collect data from the LCR HiTESTERs via LabView   Basic specifications Measurement parameters |Z|, |Y|, phase angle, Rp , Rs(ESR), G, X, B, Cp, Cs, Lp, Ls, D (dissipation factor), andQ Measurement method Source: constant current 10 µA to 100 mA (42 Hz to 1 MHz), 50 µA to 20 mA (1 MHz to 5 MHz), or constant voltage 10 mV to 5 V (42 Hz to 1 MHz), 50 mV to 1 V (1 MHz to 5 MHz) Sense: voltage, AC Source frequency 42 Hz to 5 MHz Measurement ranges |Z|, R, X:10.00 m-Ohm to 200.00 M-Ohm (depending on condition), phase angle: -180.00 to +180.00°, C: 0.3200 pF to 370.00 mF,L: 16.000 nH to 750.00 kH, D: 0.00001 to 9.99999,Q: 0.01 to 999.99, |Y|, G, B: 5.0000 nS to 99.999 S Basic accuracy |Z|:±0.08 % rdg. , phase angle : ±0.05 ° Measurement times typical values for displaying |Z| Fast: 5 msec. to Slow2: 140 msec. Display 99999 full digits, LCD with backlight display Comparator functions Setting: Upper and lower limit, percentage, or absolute value, Output: 3 levels (Hi, In, Lo), Open-collector, Isolated External printer 9442 (use with the 9443-02 or -03/9446/9593-01) Power supply 100 to 240 V AC (selectable type), 50/60Hz Dimensions, mass 352 mm(13.86 in)W × 124 mm(4.88 in)H × 323 mm(12.72 in)D, 6.5 kg (229.3 oz) Accessories Power cord(1), Fuse(1) 3522-50 / 3532-50 product catalog.pdf (1.5 MB) Back Information product catalog.pdf (145 KB)

connex homepage   main products page   manufacturer linecard   email connex

Connex Electronics Corporation   Toll Free 1-800-972-5932

Copyright © 1999, 2012 Connex Electronics Inc. All rights reserved. This file last modified 12 38 44 Friday February 16, 2007