| Basic specifications
|
| Measurement Function |
Phase detection (positive,negative),live wire check (R-S/S-T only)
|
| Voltage Detection Method |
Electrostatic induction method |
| Voltage Range |
70 to 600V AC (50/60Hz)(sine wave,continuous input)
|
| Clamp Diameter |
17mm(0.67 in) max.of insulated wiring |
| Display |
| Phase Detection |
 |
Positive , 4 LEDs lit in clockwise order and 3 short beeps
|
|
Negative , 4 LEDs lit in counterclockwise order and one continuous beep
|
| Wire Check |
|
Live , R-S and S-T lamps will light if voltage between wires are within voltage range
|
|
| Battery Check Function |
ON lamp blinks to indicate battery low status when instrument is
turned on |
| Auto Power Off |
Auto shut off if no activity is detected after power is turned ON for 15 minutes
|
| Power supply |
Two AA size batteries × 2 (rated voltage:DC3.0V; maximum rated ower:300mVA)
|
| Continuous Use |
approx.70 hours (standby) |
| Dimensions, mass |
70 mm (2.76 in)W × 75 mm (2.95 in)H × 30 mm (1.18 in)D, 200 g (7.1 oz),
Cord length : 0.7m(27.56 in) |
| Accessories |
Carrying case(1), strap(1), R6P manganese batteries(2), spiral tube(1)
|
