connex-electronics.com Brady
Brady - Lockout Tagout
Brady Lockout/Tagout Tags
Tag Front Sides
Brady Tag
Tag 1
Brady Tag
Tag 2
Brady Tag
Tag 3
Brady Tag
Tag 4
Brady Tag
Tag 5
Brady Tag
Tag 6
Brady Tag
Tag 7
Brady Tag
Tag 8
Brady Tag
Tag 9
Brady Tag
Tag 10
Brady Tag
Tag 11
Brady Tag
Tag 12
Tag Reverse Sides
Brady Tag Reverse B
Reverse B
Brady Tag Reverse F
Reverse F
Brady Tag Reverse G
Reverse G
 
Heavy Duty Polyester (B-837) 5.5" x 3"
Front \ Reverse B F G
1 65502 65535 65670
2 65520 65525 65671
3 65515 65524 -
4 65526 65527 -
5 65503 65521 -
6 65504 65522 -
7 50196 50197 -
8 50251 50252 -
9 65505 65523 -
10 50257 50258 -
11 65506 65534 -
12 50263 50264 -
Economy Polyester (B-851) 5.75" x 3"
Front \ Reverse B F G
1 66050 66051 66052
2 66063 66064 66065
3 66061 66062 -
4 66066 66067 -
5 66053 66054 -
6 66055 66056 -
7 50198 50199 -
8 50253 50254 -
9 66057 66058 -
10 50259 50260 -
11 66059 66060 -
12 50265 50266 -
Cardstock (B-853) 5.75" x 3"
Front \ Reverse B F G
1 65407 65408 65440
2 65451 65452 65453
3 65449 65450 -
4 65454 65455 -
5 65441 65442 -
6 65443 65444 -
7 50249 50250 -
8 50255 50256 -
9 65445 65446 -
10 50261 50262 -
11 65447 65448 -
12 50267 50268 -
Self Laminating Photo Tags
Self Laminating Tag
--Include employee photos for easy identification and greater impact
--Constructed of durable B-851 polyester with 1 mil polyester overlay on front
--10 tags and nylon fasteners per package
P/N Description
65501 5.75" x 3"
60378 7" x 4"
Tag Construction
Heavy Duty Poly. (B-837) Economy Poly. (B851) Cardstock (853)
--Durable polyester laminate completely encapsulates and protects graphics.
--Withstands moisture, grease, chemicals, and extreme temperatures.
--Accepts pencil, pen and marker. Pen and marker can be completely erased using isopropyl alcohol, allowing for repeated use!
--Heavy duty construction withstands up to 80 lbs. of pull force, preventing accidental removal.
--3/8" diameter heavy-duty brass grommet accepts most padlock shackles
--Tags comee with OSHA-compliant nylon fasteners
--Rigid polyester surface is easy to write on and stays legible longer than cardstock
--Exceeds OSHA 50 lb. pull requirement for tagoout devies
--3/8" diameter rolled brass eyelet accepts most padlock shackles
--Tags come with OSHA-compliant nylon fasteners
--Cost-effective tags designed for one-time use
--Does NOT meet OSHA 50 lb. pull test for tagout devicees, but can be used in conjunction with locks (see Tag Reqs.)
--3/8" diameter rolled brass eyelet accepts most padlock shackles
--Tags come with attachment strings
OSHA Tag Requirements
The following requirements apply only to tags used as tagout devices (i.e., tags used alone without locks). Tags used in combination with locks are not required to meet the same restrictions as tagout devices.
Tagout Devices Must:
--Be provided by the employer
--Be standardized by size, shape or color
--Be distinguishable from tags used for other purposes
--Be understandable to all employees
--Identify the individual who applied the tag
--Withstand the usage environment to which they are exposed for the maximum period of time that exposure is intended. Tag should not deteriorate or the message become illegible when expose to weather, wet or damp conditions, chemical or corrosive environments.
--Employ a means of attachment that is substantial enough to prevent accidental removal. The means of attachment must be of a non-releasable with a minimum unlocking strength of no less than 50 lbs.
--Warn against hazardous conditions if the machine or equipment is energized.
--Tag shall also include a legend such as the following: Do Not Operate, Do Not Start, Do Not Open, Do Not Close, etc.