| Pneumatic Quick Disconnect Lockout |
 |
| --Isolates pneumatic energy without the expense and inconvenience of installing in line lockout valves |
| --Device is applied to the male fitting, isolating equipment from all compressed air sources |
| --Acommodates the majority of 1/4", 3/8", 1/2" male fittings |
| --Hole in center of device allows for permanent storage on an air hose and a loop on the side can be used to hang the hose and lockout device |
| --Lockout using a padlock with 1/4" or 9/32" shackle |
|
| P/N |
Description |
 64221 |
Pneumatic Quick Disconnect Lockout |
|
 |
| SMC Air Line Regulator Lockout |
 |
| --Enables regulator to be locked in the on, off or throttled position |
| --Easy installation: remove snap cap, install lockout on regulator rod, snap replacement cap on regulator |
| --Comes with lockout, cap and allen wrench |
| --Patent No. 5,823,023 |
|
| P/N |
Description |
|
64539 |
Lockout for Miniature SMC Models AR3000 / NAR3000 |
|
64540 |
Lockout for Inermediate SMC Models AR3000 / NAR3000 |
|
|
| PRINZING Cylinder Tank Lockout |
 |
| --Used to lockout cylinder tanks, including propane tanks on fork trucks and stand alone propane tanks |
| --Apply with ease to prevent access to the valve handle |
| --Designed to fit in tight spaces |
| --Valve stem hole is 1.25" in diameter |
| --Made of rugged polystyrene plastic |
|
| P/N |
Description |
|
SD02M |
PRINZING Cylinder Tank Lockout |
|
|
| PRINZING Gas Cylinder Lockout |
 |
| --Prevents access to the main cylinder valve |
| --No need to match your lockout device to varying diameters and threads of cylinder caps |
| --Accommodates neck rings up to 3.5" diameter |
| --Installs in seconds to save time |
|
| P/N |
Description |
|
LM023E |
PRINZING Gas Cylinder Lockout |
|
|
| Snap Cap™ Gas Cylinder Lockout |
 |
| --Designed to fit most North American high and low pressure gas cylinders |
| --SNAP CAP cylinder safety device meets DOT standards |
| --The SNAP CAP denies access to the main cylinder control and regulator attachment |
| --Welded steel construction and powder coated for many years of use |
|
| P/N |
Description |
|
90496 |
6.5" x 3-1/8" x 11 UN, High Pressure Fine Thread |
|
95137 |
6.5" x 3-1/2" x 11 UN, Low Pressure Fine Thread |
|
95138 |
6.5" x 3-1/8" x 11 UN, High Pressure Coarse Thread |
|
95139 |
6.5" x 3-1/2" x 11 UN, Low Pressure Coarse Thread |
|
